Liugong CLG418 – specifications
Series: LiuGong Motor Grader
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Liugong CLG418 is the stronger motor grader of the CLG motor grader group. Instead of the smaller six-cylinder in its sibling, it uses a Cummins 6CTA-8.3 with a displacement of 8,300 cm³. Like the smaller machine it has 6 cylinders and a rated speed of 2,200 rpm, but it has considerably more displacement and therefore power reserve for heavy soil and deep cuts.
Power passes through a powershift transmission. The length is 8,732.5 mm and the turning radius is 8,260 mm, slightly more than on the smaller sister model. As a machine for road building, subgrade work and gravel road upkeep, it covers jobs where a small grader reaches its limits, such as heavy clay or removing material with blade and ripper.
Liugong counts the CLG418 among the best sellers of its grader line, and it is used mainly on construction work.
LiuGong CLG416 and CLG418 – motor graders from China
LiuGong was founded in 1958 in Liuzhou, China, and ranks among the ten largest construction equipment makers in the world and as the largest maker of wheel loaders. It built China's first modernised wheel loader in 1966, became China's first publicly listed construction equipment company in 1993, formed a joint venture with ZF in 1995 and acquired the Polish manufacturer Dressta in 2012.
Read on 2 more paragraphs
Besides wheel loaders the range includes bulldozers, excavators, rollers, cranes and motor graders. Graders such as the CLG series level road and site surfaces and maintain unpaved roads.
Listed in the register: LiuGong CLG416 and CLG418.
Sources: Wikipedia LiuGong
Technical data
Engine
| Engine model | 6CTA-8.3correct |
|---|---|
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 8,300 cm³correct |
Dimensions and weights
| Length | 8,732.5 mmcorrect |
|---|
Drivetrain and chassis
| Gearbox type | powershift transmissioncorrect |
|---|---|
| Turning radius | 8,260 mmcorrect |
More machines with this engine (Cummins 6CTA 8.3, 8)
Frequently asked questions
What engine does the Liugong CLG418 have?
6 cylinders, 8,300 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Grader in 3D section
Turn the model, look inside and click an assembly — each one is explained.
