Liugong CLG416 – specifications
Series: LiuGong Motor Grader
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Liugong CLG416 is the smaller of the two motor graders with a four-digit number in the LiuGong Motor Grader range. It is intended for grading and profiling in road construction and for maintaining unpaved roads. Power comes from a Cummins QSB-173C engine with 6 cylinders and a displacement of 5,901 cm³; its rated speed is 2,200 rpm.
Power reaches the wheels through a powershift transmission, so gears can be changed under load, which helps when cutting depth and ground resistance keep changing. The length is 8,732.5 mm and the turning radius 8,230 mm, so the machine needs a little less room to turn on sites and narrow tracks than its stronger sibling.
Operators who need more engine output reach for the next larger grader of the range with its bigger displacement. The CLG416 suits contractors who maintain gravel roads and do fine grading on smaller jobs.
LiuGong CLG416 and CLG418 – motor graders from China
LiuGong was founded in 1958 in Liuzhou, China, and ranks among the ten largest construction equipment makers in the world and as the largest maker of wheel loaders. It built China's first modernised wheel loader in 1966, became China's first publicly listed construction equipment company in 1993, formed a joint venture with ZF in 1995 and acquired the Polish manufacturer Dressta in 2012.
Read on 2 more paragraphs
Besides wheel loaders the range includes bulldozers, excavators, rollers, cranes and motor graders. Graders such as the CLG series level road and site surfaces and maintain unpaved roads.
Listed in the register: LiuGong CLG416 and CLG418.
Sources: Wikipedia LiuGong
Technical data
Engine
| Engine model | QSB-173Ccorrect |
|---|---|
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 5,901 cm³correct |
Dimensions and weights
| Length | 8,732.5 mmcorrect |
|---|
Drivetrain and chassis
| Gearbox type | powershift transmissioncorrect |
|---|---|
| Turning radius | 8,230 mmcorrect |
Frequently asked questions
What engine does the Liugong CLG416 have?
6 cylinders, 5,901 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Grader in 3D section
Turn the model, look inside and click an assembly — each one is explained.
