Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Lingxiao › Other models › YE2-802-2

Lingxiao YE2-802-2

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Lingxiao YE2-802-2 is a three-phase induction motor built by Lingxiao. The rated output is 1.1 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The housing is frame size 802. The protection class is IP55. The efficiency is 80.2 per cent at full load, 80.5 per cent at 75 per cent load and 77.9 per cent at half load. The mounting arrangement to IEC 60034-7 is V18. The motor is built in China. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Lingxiao range ranges from 0.75 to 15 kW; the YE2-802-2 sits at the bottom of that range with 1.1 kW. Its immediate neighbours are the YE2-71-2 below it with 0.75 kW and the YE2-803-2 above it with 1.5 kW. 9 Lingxiao models are on record.

Lingxiao YE2 – other electric motors: the collective page of vertically mounted three-phase motors outside the named ranges, frame sizes 71 to 132, 0.75 to 15 kW, exclusively vertical form V1/V18

This page gathers the Lingxiao electric motors the Australian energy-efficiency register (GEMS/MEPS) could not assign to a named range. Lingxiao is a Chinese maker building three-phase motors to the widely used Chinese YE2 scheme – the successor range to the older Y series with raised efficiencies. The type codes, such as YE2-100LA-2 or YE2-71-2, state the frame size directly in the name, from 71 to 132.

Read on 3 more paragraphs

The register lists here 9 versions with 0.75 to 15 kW, exclusively two-pole, at 415 V. Full-load efficiencies range from 79.07 to 90.67%, and at 75% load from 79.77 to 90.99%. Protection is uniformly IP55, manufacturing is exclusively in China, testing followed the 2019 GEMS determination with test method 2-1-1B. Mounting is limited to the vertical forms V18 (7 motors) and V1 (2 motors) – unlike most standard motors in the register, horizontal foot mounting B3 is absent here.

Vertically mounted motors of this frame size typically drive pumps with a vertical shaft or agitators, where installed height matters more than side foot fixing; Lingxiao thus serves a market segment where standard motors would usually need retrofitting for vertical operation.

When buying used, bearing condition matters – with a vertical shaft, especially axial load –, a checked insulation resistance of the winding, the condition of the terminal box and fan cover, and a legible nameplate with frame size and pole count; inverter suitability on simple Y2/YE2 versions should be checked case by case. Spares run through the Chinese specialist trade.

Sources: SpecCodex register, model data: Lingxiao (weitere Modelle, MEPS-Registrierungen)

Technical data

Engine

Rated output1.1 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size802correct
Mounting (IEC 60034-7)V18correct
Efficiency at full load80.2 %correct
Efficiency at 75 % load80.48 %correct
Efficiency at half load77.94 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Lingxiao YE2-802-2 have?

The Lingxiao YE2-802-2 delivers 1.1 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare