Lindner Geotrac 104
Built: 2008 · Series: Geotrac Serie 4
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Between 2008, Lindner built the Lindner Geotrac 104 as a tractor from the Geotrac Serie 4 series. The four-cylinder engine, displacing 4.4 litres, produces 109 hp.
Design speed is 50 km/h. Length is 4.15 m, with 2.32 m width and 2.76 m in height. Unladen, it tips the scales at 4,150 kg.
Lindner Geotrac 114: mountain tractor from the Austrian manufacturer based in Kundl, built 2008, four-cylinder diesel engine of 4,400 cm³ displacement, 116 hp and 4,150 kg gross weight
Lindner, based in Kundl in Tyrol, is an Austrian manufacturer that specialises in tractors for mountain farming. The Geotrac series forms the backbone of its standard-tractor line-up and is designed for use on steep slopes and grassland, where a low centre of gravity and a well-engineered four-wheel-drive layout determine stability.
Read on 3 more paragraphs
The Geotrac 114, built in 2008, is powered by a four-cylinder diesel engine with 4,400 cm³ displacement and produces 116 hp. Gross weight is 4,150 kg and the design top speed is 50 km/h, giving a power-to-weight figure of roughly 35.8 kg per hp, a typical value for a standard tractor of this size class. At 4,150 mm long, 2,320 mm wide and 2,761 mm high, with a wheelbase of 2,420 mm, the machine ranks among the larger standard tractors in its class.
With a top speed of 50 km/h the Geotrac 114 falls into German licence class T, which covers vehicles up to 60 km/h. Tractors of this size mainly handle grassland maintenance, forage and transport work, and driving mounted implements through the rear three-point hitch on demanding terrain, which calls for a low centre of gravity and a strong engine.
When buying a used Geotrac of this model year it is worth checking the slope-compensation system and the hydraulic lines for wear, since these are put under particular strain during continuous work on slopes. Cab seals and the vehicle electronics are also worth a look, along with a function test of the PTO clutch and the availability of spare parts, which for this specialist make are usually only obtainable through authorised dealers.
Sources: SpecCodex-Register: Kennwerte des Modells Geotrac 114
Technical data
Engine
| Power | 109 hpcorrect |
|---|---|
| Power | 109 hpcorrect |
| Cylinders | 4correct |
| Displacement | 4,400 cm³correct |
Dimensions and weights
| Length | 4,150 mmcorrect |
|---|---|
| Width | 2,320 mmcorrect |
| Height | 2,761 mmcorrect |
| Wheelbase | 2,420 mmcorrect |
| Unladen weight | 4,150 kgcorrect |
Drivetrain and chassis
| Top speed | 50 km/hcorrect |
|---|
Where this model stands
Power-to-weight ratio: 19.3 kW/t (80 kW / 4.2 t)
Power class: Large (100–180 hp)
Stronger than 70% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lindner Geotrac 104 have?
The Lindner Geotrac 104 delivers 109 hp.
How much does the Lindner Geotrac 104 weigh?
The unladen weight is 4,150 kg.
What engine does the Lindner Geotrac 104 have?
4 cylinders, 4,400 cm³ displacement.
How fast does the Lindner Geotrac 104 go?
Top speed is 50 km/h.
What are the dimensions of the Lindner Geotrac 104?
4,150 mm × 2,320 mm × 2,761 mm.
When was the Lindner Geotrac 104 built?
Production years: 2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
