Lindner Geotrac - 63 A
Built: 2004 · Series: Geotrac - Serie 3
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lindner Geotrac Series 3 – five mountain tractors from Kundl in Tyrol from the 63 A to the 103 A, 3.3 to 4.4 litre displacement, three- and four-cylinder diesels, 2,880 to 3,720 kg unladen weight
Lindner is a family-owned tractor works from Kundl in Tyrol that has built machinery for mountain farming and municipal use for decades. Geotrac is the company's central tractor range, developed through several numbered series; series 3 comprises five models from the Geotrac 63 A to the Geotrac 103 A, with the number in the name denoting the power class. The models are powered by three- and four-cylinder diesel engines.
Read on 3 more paragraphs
The register lists here five versions with displacements from 3,300 to 4,400 cm³ from three or four cylinders, unladen weights from 2,880 to 3,720 kg, lengths from 4,000 to 4,270 mm, widths from 1,970 to 2,020 mm and heights from 2,350 to 2,560 mm; rated speed is uniformly 2,200 rpm, all models run on diesel.
In the segment of alpine and municipal tractors, Lindner competes with makers such as Reform, Steyr and the compact ranges of the big groups; the Geotrac range scores with rugged build, good service access and suitability for steep terrain and grassland where standard tractors reach their limits.
When buying used, hydraulic couplings, the clutch and front axle bearings deserve attention, as does corrosion on wings and steps from work on damp meadows; Lindner supplies spare parts itself, which secures supply even for older Geotrac series. Front-loader brackets and cab mounting bushings are worth checking too, since many Geotracs see daily loader duty around the farmyard.
Sources: SpecCodex register, model data: Lindner Geotrac Serie 3, Lindner Traktorenwerk (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 65 hpcorrect |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 3,300 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,000 mmcorrect |
|---|---|
| Width | 1,970 mmcorrect |
| Height | 2,350 mmcorrect |
| Wheelbase | 2,083 mmcorrect |
| Unladen weight | 2,880 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 16V / 8Rcorrect |
| Front tyres | 365/70 R 18correct |
| Rear tyres | 380/85 R 28correct |
Where this model stands
Power-to-weight ratio: 16.6 kW/t (48 kW / 2.9 t)
Power class: Universal (40–100 hp)
Stronger than 44% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lindner Geotrac - 63 A have?
The Lindner Geotrac - 63 A delivers 65 hp.
How much does the Lindner Geotrac - 63 A weigh?
The unladen weight is 2,880 kg.
What engine does the Lindner Geotrac - 63 A have?
3 cylinders, 3,300 cm³ displacement, Diesel.
What are the dimensions of the Lindner Geotrac - 63 A?
4,000 mm × 1,970 mm × 2,350 mm.
When was the Lindner Geotrac - 63 A built?
Production years: 2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
