Lindner BF 350 N / A / GT
Built: 1969–1971 · Series: 50 er - Serie
More machines from model year 1969
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lindner 50 series – the Bergfreund range BF 250, BF 350 and BF 450 from Kundl: two- to four-cylinder diesels, 25 to 45 hp, 2,400 to 2,600 rpm
Lindner has built tractors in Kundl in Tyrol since 1948, with a focus on tractors for mountain farming. The 50 series with the BF 250, BF 350 and BF 450 types carries the BF abbreviation for Bergfreund, the name of Lindner's early ranges, and is available in the N, A and GT equipment levels.
Read on 4 more paragraphs
The register lists here 3 versions with 25 to 45 hp from two- to four-cylinder diesel engines of 1,570 to 2,500 cm³ displacement at rated speeds of 2,400 to 2,600 rpm. Unladen weights lie between 1,220 and 1,620 kg, lengths between 3,100 and 3,370 mm, widths between 1,520 and 1,670 mm and heights between 1,340 and 1,350 mm.
As compact, light tractors for steep meadows and fields in the Alpine region, the Bergfreund models formed the basis of Lindner's reputation as a specialist in mountain farming, with customers mainly in Austria, Bavaria and South Tyrol.
On a used example, clutch and mechanical gearbox condition, hydraulic tightness, rust on chassis and mudguards after use on steep terrain, and brake function count; parts for the small diesels run through Lindner itself and independent farm-machinery workshops.
PTO shafts in this power class run at a standardised 540 revolutions per minute, sufficient for mowers, snow blowers and forage wagons in mountain operation. On the range's air-cooled early versions there is no radiator or coolant hose to check, but the cooling fins and fan need attention, as does the cylinder head for heat cracks after sustained hillside use. Lindner has remained an independent family company in Kundl, unlike many tractor makers of this generation that were absorbed into larger groups.
Sources: SpecCodex register, model data: Lindner 50er-Serie, Lindner
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 35 hpcorrect |
| Power | 35 hpcorrect |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 1,760 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,100 mmcorrect |
|---|---|
| Width | 1,520 mmcorrect |
| Height | 1,340 mmcorrect |
| Wheelbase | 1,820 mmcorrect |
| Unladen weight | 1,360 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 8V / 4Rcorrect |
| Forward gears | 8correct |
| Reverse gears | 4correct |
| Front tyres | 5, 50-16 ( A/GT = 7, 00-18 )correct |
| Rear tyres | 9-24 ( GT: Zwilling )correct |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 18.9 kW/t (26 kW / 1.4 t)
Power class: Compact (< 40 hp)
Stronger than 21% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lindner BF 350 N / A / GT have?
The Lindner BF 350 N / A / GT delivers 35 hp.
How much does the Lindner BF 350 N / A / GT weigh?
The unladen weight is 1,360 kg.
What engine does the Lindner BF 350 N / A / GT have?
4 cylinders, 1,760 cm³ displacement, Diesel.
What are the dimensions of the Lindner BF 350 N / A / GT?
3,100 mm × 1,520 mm × 1,340 mm.
When was the Lindner BF 350 N / A / GT built?
Production years: 1969–1971.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
