Start › Excavators & compaction › Liebherr › R984C

Liebherr R984C

Series: Liebherr Hydraulic Excavator

Source: https://www.truck1.eu/construction-machinery/crawler-excavat

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the R984C, Liebherr offers a model from the Liebherr Hydraulic Excavator series. The engine delivers 529.4 kW, has 6 cylinders, with a displacement of 18,900.8 cm³. Rated speed is 2,100 rpm. The unladen weight is 118,600 kg. Ground clearance is 862.6 mm. The tank holds 1,585.3 litres. The pump delivers 472 l/min. The hydraulic tank holds 1,660.3 litres. Working pressure is 340 bar. The electrical system runs on 24 V. The engine fitted is the QSK-19 C 750. The Liebherr Hydraulic Excavator series covers 43 models. Rated output within it ranges from 62 to 949.3 kW; the R984C sits in the middle of that range with 529.4 kW. Its immediate neighbours are the R974C below it with 395.1 kW and the R994 above it with 949.3 kW. 480 Liebherr models across 20 series are on record. The model is listed under Excavators & compaction. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine modelQSK-19 C 750correct
Power529.4 kWcorrect
Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement18,900.8 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Ground clearance862.6correct
Unladen weight118,600 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow472 l/mincorrect
Hydraulic oil capacity1,660.3 lcorrect
Hydraulic pressure340 barcorrect
Fuel tank capacity1,585.3 lcorrect

Other data

Height4,456.2correct

Where this model stands

Power-to-weight ratio: 4.5 kW/t (529 kW / 118.6 t)

Stronger than 97% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr R984C have?

The Liebherr R984C delivers 529 kW.

How much does the Liebherr R984C weigh?

The unladen weight is 118,600 kg.

What engine does the Liebherr R984C have?

6 cylinders, 18,901 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

R312

R317

R900C

R900HDS

R904C

R912

R914 COMPACT LITRONIC

R914B

R914C

R918 LITRONIC

R920 COMPACT LITRONIC

R924 COMPACT TUNNEL LITRONIC

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare