Technical register for agricultural, construction and commercial machinery · sourced data

Liebherr R317

Series: Liebherr Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the R317, Liebherr offers a model from the Liebherr Hydraulic Excavator series. The engine delivers 87.2 kW, has 4 cylinders, with a displacement of 4,801.4 cm³. Rated speed is 1,800 rpm. The unladen weight is 17,700 kg. Ground clearance is 472.4 mm. The tank holds 290.3 litres. The pump delivers 297.2 l/min. The hydraulic tank holds 170.3 litres. Working pressure is 350 bar. The electrical system runs on 24 V. The engine fitted is the BF4M1013EC. The Liebherr Hydraulic Excavator series covers 43 models. Rated output within it ranges from 62 to 949.3 kW; the R317 sits at the bottom of that range with 87.2 kW. Its immediate neighbours are the R900HDS below it with 67 kW and the R900C above it with 88.1 kW. 480 Liebherr models across 20 series are on record. The model is listed under Excavators & compaction. 14 verified figures from 1 source are on file.

Liebherr R-series: crawler excavator codes between size class and Litronic generation

The "R" in Liebherr's excavator range stands for crawler (Raupe) and separates the line from the wheeled "A" models. The number that follows marks the size class: across the 41 R-series models recorded in SpecCodex, operating weight spans 15,300 to 659,000 kg — from compact excavators in the R-31x class up to mining-scale machines weighing in the hundreds of tonnes.

Read on 3 more paragraphs

The "Litronic" suffix denotes Liebherr's electronically controlled hydraulic system, standard on nearly all R models since the 1980s. Trailing letters (A, B, C…) instead mark successive revision generations of the same model, usually tied to new emissions stages and engines.

For the machines recorded in the database, engine output ranges from 62 to 949 kW, displacement from 3,000 to 65,000 cm³, and cylinder count from 4 to 16 — a span running from compact building-site excavators up to the large engines fitted to mining machines.

When buying used, the generation letter after the number is the best clue to emissions stage and control generation fitted; also check the undercarriage and arm bushings, and cross-check the hour meter against the service book. Models such as R312, R904C, R912 and R996 illustrate the range from compact excavator to large-scale machine.

Sources: Kennwerte der Modelle Liebherr Hydraulic Excavator, – R 928 Litronic, Liebherr, – Erklärung Typenbezeichnungen Liebherr-Bagger, Bauforum24

Technical data

Engine

Engine modelBF4M1013ECcorrect
Power87.2 kWcorrect
Rated speed1,800 rpmcorrect
Cylinders4correct
Displacement4,801.4 cm³correct
AspirationTurbo-chargedcorrect

Dimensions and weights

Ground clearance472.4correct
Unladen weight17,700 kgcorrect

Working data

Pump flow297.2 l/mincorrect
Hydraulic oil capacity170.3 lcorrect
Hydraulic pressure350 barcorrect
Fuel tank capacity290.3 lcorrect

Other data

Cab height2,996.2correct
System voltage24 Vcorrect

More machines with this engine (BF4M1013EC, 5)

Where this model stands

Power-to-weight ratio: 4.9 kW/t (87 kW / 17.7 t)

Stronger than 34% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr R317 have?

The Liebherr R317 delivers 87.2 kW.

How much does the Liebherr R317 weigh?

The unladen weight is 17,700 kg.

What engine does the Liebherr R317 have?

4 cylinders, 4,801 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare