Start › Excavators & compaction › Liebherr › R964C

Liebherr R964C

Series: Liebherr Hydraulic Excavator

Source: https://www.technikboerse.at/gebraucht/kettenbagger-756/lieb

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Liebherr R964C is a model in the Liebherr Hydraulic Excavator series. The engine delivers 440 hp (323.6 kW), with a displacement of 16,160.9 cm³. The unladen weight is 65,680.2 kg. Ground clearance is 606.6 mm. The tank holds 1,250.3 litres. The pump delivers 410.3 l/min. The hydraulic tank holds 1,050.1 litres. The electrical system runs on 24 V. The engine fitted is the D9508. The Liebherr Hydraulic Excavator series covers 43 models. Rated output within it ranges from 84.4 to 3,041.6 hp; the R964C sits at the bottom of that range with 440 hp. Its immediate neighbours are the R954C below it with 330.5 hp and the R974C above it with 537.1 hp. 480 Liebherr models across 20 series are on record. The model is listed under Excavators & compaction. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine modelD9508correct
Power440 hp (323.6 kW)correct
Displacement16,160.9 cm³correct
Aspirationcommon rai injection turbo-charged inter-cooled reduced emissionscorrect

Dimensions and weights

Ground clearance606.6correct
Unladen weight65,680.2 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow410.3 l/mincorrect
Hydraulic oil capacity1,050.1 lcorrect
Fuel tank capacity1,250.3 lcorrect

Where this model stands

Power-to-weight ratio: 4.9 kW/t (324 kW / 65.7 t)

Stronger than 92% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr R964C have?

The Liebherr R964C delivers 440 hp.

How much does the Liebherr R964C weigh?

The unladen weight is 65,680 kg.

What engine does the Liebherr R964C have?

16,161 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

R312

R317

R900C

R900HDS

R904C

R912

R914 COMPACT LITRONIC

R914B

R914C

R918 LITRONIC

R920 COMPACT LITRONIC

R924 COMPACT TUNNEL LITRONIC

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare