Start › Excavators & compaction › Liebherr › R944C

Liebherr R944C

Series: Liebherr Hydraulic Excavator

Source: https://www.liebherr.com/en-int/p/95795-5376592

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Liebherr R944C is a model in the Liebherr Hydraulic Excavator series. The engine delivers 261.6 hp (192.4 kW), has 6 cylinders, with a displacement of 10,500.8 cm³. Rated speed is 1,800 rpm. The unladen weight is 38,192.5 kg. Ground clearance is 539.5 mm. The tank holds 660.2 litres. The pump delivers 303.2 l/min. The hydraulic tank holds 710.1 litres. The electrical system runs on 24 V. The engine fitted is the D 936 L. The Liebherr Hydraulic Excavator series covers 43 models. Rated output within it ranges from 84.4 to 3,041.6 hp; the R944C sits at the bottom of that range with 261.6 hp. Its immediate neighbours are the R934C below it with 205.8 hp and the R954C above it with 330.5 hp. 480 Liebherr models across 20 series are on record. The model is listed under Excavators & compaction. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine modelD 936 Lcorrect
Power261.6 hp (192.4 kW)correct
Rated speed1,800 rpmcorrect
Cylinders6correct
Displacement10,500.8 cm³correct
Aspirationturbo-charged and after-cooled reduced emissionscorrect

Dimensions and weights

Ground clearance539.5correct
Unladen weight38,192.5 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow303.2 l/mincorrect
Hydraulic oil capacity710.1 lcorrect
Fuel tank capacity660.2 lcorrect

More machines with this engine (D 936 L, 3)

Where this model stands

Power-to-weight ratio: 5 kW/t (192 kW / 38.2 t)

Stronger than 80% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr R944C have?

The Liebherr R944C delivers 262 hp.

How much does the Liebherr R944C weigh?

The unladen weight is 38,192 kg.

What engine does the Liebherr R944C have?

6 cylinders, 10,501 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Used equipment offers
1 current listings for Liebherr R944C on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

R312

R317

R900C

R900HDS

R904C

R912

R914 COMPACT LITRONIC

R914B

R914C

R918 LITRONIC

R920 COMPACT LITRONIC

R924 COMPACT TUNNEL LITRONIC

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare