Technical register for agricultural, construction and commercial machinery · sourced data
Start › Excavators & compaction › Liebherr › Other models › PR 724 Litronic

Liebherr PR 724 Litronic

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The PR 724 Litronic comes from Liebherr. The engine delivers 161 hp (120 kW). The engine comes from Liebherr. Drive: tracked undercarriage. The engine is water-cooled. The model was built in Germany. The fuel is diesel. Rated output across the Liebherr range ranges from 42.1 to 2,725 kW; the PR 724 Litronic sits at the bottom of that range with 120 kW. Its immediate neighbours are the PR724 XL below it with 117.8 kW and the A918 LITRONIC above it with 120.1 kW. 548 Liebherr models across 45 series are on record.

Liebherr PR 724 Litronic – German tracked excavator with its own Liebherr diesel engine, water-cooled, 120 kW/161 hp output and electronic Litronic control

Liebherr is a German construction-equipment manufacturer with one of its main earthmoving-machinery plants in Germany, ranking among the world's leading suppliers of tracked excavators, wheel loaders and cranes, and it consistently develops its own engines and hydraulic components rather than relying on outside engine makers. The PR 724 Litronic recorded here belongs to the range of crawler dozers and tracked excavators in which the Litronic suffix denotes electronic control of the engine and hydraulics.

Read on 3 more paragraphs

The PR 724 Litronic is powered by a water-cooled diesel engine of Liebherr's own manufacture, delivering 120 kW, or 161 hp. The machine's running gear is a tracked undercarriage.

As a tracked excavator, the PR 724 is built for digging work where stability and breakout force matter more than road ability: the tracked drive spreads the machine's weight over a large contact area, allowing work on soft or uneven ground. The Litronic electronics coordinate the engine and hydraulics electronically, which, compared with purely mechanical control, allows more even fuel consumption under varying digging loads.

When buying one used, check the condition of the tracked undercarriage for track tension and wear on rollers and drive wheels. The Litronic controller should be checked for fault messages in the on-board computer, and the Liebherr-made engine should show a complete service history, since the injection system and turbocharger are the most expensive wearing parts.

Sources: SpecCodex-Register: Kennwerte des Modells Liebherr PR 724 Litronic, Liebherr (manufacturer)

Technical data

Engine

Engine makeLiebherrcorrect
Fueldieselcorrect
Power161 hp (120 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivetracked undercarriagecorrect

Origin and approval

PlantGermanycorrect

Frequently asked questions

How much power does the Liebherr PR 724 Litronic have?

The Liebherr PR 724 Litronic delivers 161 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare