Liebherr A924C

Series: Liebherr Mobile Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the A924C, Liebherr offers a model from the Liebherr Mobile Excavator series. The engine delivers 186.6 hp (137.2 kW), has 4 cylinders, with a displacement of 7,000.6 cm³. Rated speed is 1,800 rpm. The unladen weight is 25,582.6 kg. The wheelbase measures 2,752.3 mm. Ground clearance is 381 mm. The tank holds 400.1 litres. The pump delivers 215 l/min. The hydraulic tank holds 430 litres. Working pressure is 350 bar. The engine fitted is the D 934 L. Tyre size: 11,00-20. The Liebherr Mobile Excavator series covers 18 models. Rated output within it ranges from 118.6 to 306.2 hp; the A924C sits in the lower part of that range with 186.6 hp. Its immediate neighbours are the A914C below it with 165.3 hp and the A924 LITRONIC above it with 190.6 hp. 480 Liebherr models across 20 series are on record. The model is listed under Excavators & compaction. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine modelD 934 Lcorrect
Power186.6 hp (137.2 kW)correct
Rated speed1,800 rpmcorrect
Cylinders4correct
Displacement7,000.6 cm³correct
Aspirationturbo-charged and after-cooled reduced emissionscorrect

Dimensions and weights

Wheelbase2,752.3correct
Ground clearance381correct
Unladen weight25,582.6 kgcorrect

Drivetrain and chassis

Gearbox typeoversized two speed power shift transmission with additional creeper speedcorrect
Tyre size11.00-20correct

Working data

Pump flow215 l/mincorrect
Hydraulic oil capacity430 lcorrect
Hydraulic pressure350 barcorrect
Fuel tank capacity400.1 lcorrect

Where this model stands

Power-to-weight ratio: 5.4 kW/t (137 kW / 25.6 t)

Stronger than 67% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr A924C have?

The Liebherr A924C delivers 187 hp.

How much does the Liebherr A924C weigh?

The unladen weight is 25,583 kg.

What engine does the Liebherr A924C have?

4 cylinders, 7,001 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare