Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Latre › D 32

Latre D 32

Built: 1979 · Series: Other models

More machines from model year 1979

The photo shows the OPF-TM30 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/saris-pl-306-170-2700

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The D 32 comes from Latre. Production: 1979. The machine is 12,900 mm long and 2,520 mm wide. The unladen weight is 7,620 kg. The wheelbase measures 7,950 mm. Top speed is 100 km/h. The gross vehicle weight is 30,000 kg. The machine runs on 4 wheels. Unladen weight across the Latre range ranges from 4,150 to 12,260 kg; the D 32 sits in the middle of that range with 7,620 kg. Its immediate neighbours are the OC 38/96 BE below it with 7,350 kg and the LATRE D20-93 above it with 7,660 kg. Gross vehicle weight across the Latre range ranges from 16,000 to 39,000 kg; here the D 32 sits in the upper part of that range with 30,000 kg. 23 Latre models are on record.

Latre – other models: the collective page of semi-trailers and tandem trailers outside the named ranges, type logic from a range letter and a build-year suffix, gross weight from 16 to 39 tonnes

This page gathers the Latre trailers the register could not assign to a named range – consistently multi-axle semi-trailers and tandem trailers for heavy-duty use. The type designations combine a letter for the range (D for the standard version, OC and OPF for special versions) with a number for the payload class and a build-year suffix after the slash, for example D 26/81 or OC 38/96 BE. The varying notation with and without a space or slash (D26/81 alongside D 26/81), and multi-part codes such as OPF/2AT/30/98 or OPF-TM30-99, show that the same base type was recorded in the register in several different ways.

Read on 3 more paragraphs

The register lists here 23 versions with unladen weights from 4,150 to 12,260 kg, gross weights from 16,000 to 39,000 kg, lengths from 9,510 to 14,040 mm and widths from 2,500 to 2,600 mm.

With gross weights of 16 to 39 tonnes and lengths of up to over 14 metres, the Latre trailers sit in the range of classic lorry semi-trailers and tandem low-loaders, as used in freight transport and construction for containers, machinery and bulk goods. As semi-trailers they need a tractor unit with a matching fifth-wheel height and sufficient landing-leg capacity, and they change hands frequently between hauliers, construction firms and farm-machinery dealers.

On a used example, the frame and axle mounts should be checked for rust and cracks, along with the condition of brake drums or discs and air-suspension bellows, the tightness of the brake lines, the condition of the kingpin and landing legs, and, depending on the body, the sides, tarpaulin and lashing points; on versions with a lift axle, also check its operation and control. Parts for older build years are sourced through specialist trailer workshops.

Sources: SpecCodex register, model data: Latre (weitere Modelle)

Technical data

Dimensions and weights

Length12,900 mmcorrect
Width2,520 mmcorrect
Wheelbase7,950 mmcorrect
Unladen weight7,620 kgcorrect
Gross vehicle weight30,000 kgcorrect

Drivetrain and chassis

Wheels4correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the Latre D 32 weigh?

The unladen weight is 7,620 kg.

What is the gross vehicle weight of the Latre D 32?

30,000 kg.

Up to what speed is the Latre D 32 approved?

Approved up to 100 km/h.

What are the dimensions of the Latre D 32?

12,900 mm × 2,520 mm.

When was the Latre D 32 built?

Production years: 1979.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare