Start › Tractors › Landini › Vision 100

Landini Vision 100

Built: 2002–2004 · Series: Vision

More machines from model year 2002

Source: https://www.technikboerse.com/marke/landini-687

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Landini Vision 100 belongs to the Vision series. Production: 2002–2004. The engine delivers 92.5 hp (68 kW), has 4 cylinders, with a displacement of 4,400 cm³. The machine is 4,430 mm long, 1,850 mm wide and 2,630 mm high. The unladen weight is 4,070 kg. The wheelbase measures 2,380 mm. The tank holds 120 litres. Tyres: front 420/70R24, rear 520/70R34. The Vision series covers 5 models. Rated output within it ranges from 82.7 to 100 hp; the Vision 100 sits in the middle of that range with 92.5 hp. Its immediate neighbours are the Vision 85 below it with 82.7 hp and the Vision 95 above it with 93.2 hp. Unladen weight within it ranges from 4,061.5 to 4,160 kg; here the Vision 100 sits at the bottom of that range with 4,070 kg. 222 Landini models across 35 series are on record.

Landini Vision – tractors from Fabbrico with Perkins four-cylinder engines of the 1104C series, models from 85 to 105, 60.8 to 73.5 kW, 4,400 cm³ displacement

Landini builds the Vision range at its plant in Fabbrico near Reggio Emilia; it comprises the Vision 85, 95, 100 and 105 models, all with four-cylinder diesel engines of the Perkins 1104C-44 or 1104C-44T type. The type numbers from 85 to 105 order the models by power class. Fabbrico has been Landini's central production site within the Argo Tractors group since the 1960s.

Read on 3 more paragraphs

The register lists 5 versions with 60.8 to 73.5 kW from four-cylinder engines of 4,400 cm³ displacement, unladen weights of 4,062 to 4,160 kg, lengths of 4,430 to 4,440 mm and PTO outputs of 76 to 91 hp.

The Vision occupies Landini's mid power segment for arable and mixed farms; with the Perkins 1104C engines, the range shares its drivetrain technology with numerous other tractor and machinery makers that rely on this widely used engine family. Within the Argo Tractors group, the Vision shares its platform with comparable models from sister brand McCormick, differing in paint and distribution.

On a used Vision, check the clutch and gearbox, the turbocharger on the T variants, and the hydraulic pump and lift linkage; rust on the fenders and cab is worth checking on older examples, and parts for the Perkins 1104C engines are readily available through the broad international Perkins service network across Europe and beyond.

Sources: SpecCodex register, model data: Landini Vision, Landini (Argo Tractors, Hersteller)

Technical data

Engine

Power	92.5 hp (68 kW)correct
Cylinders	4correct
Displacement	4,400 cm³correct

Dimensions and weights

Length	4,430 mmcorrect
Width	1,850 mmcorrect
Height	2,630 mmcorrect
Wheelbase	2,380 mmcorrect
Unladen weight	4,070 kgcorrect

Drivetrain and chassis

Front tyres	420/70R24correct
Rear tyres	520/70R34correct

Working data

Fuel tank capacity	120 lcorrect

Where this model stands

Power-to-weight ratio: 16.7 kW/t (68 kW / 4.1 t)

Power class: Universal (40–100 hp)

Stronger than 62% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Landini Vision 100 have?

The Landini Vision 100 delivers 92.5 hp.

How much does the Landini Vision 100 weigh?

The unladen weight is 4,070 kg.

What engine does the Landini Vision 100 have?

4 cylinders, 4,400 cm³ displacement.

What are the dimensions of the Landini Vision 100?

4,430 mm × 1,850 mm × 2,630 mm.

When was the Landini Vision 100 built?

Production years: 2002–2004.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →