Landini Serie 5-085
Built: 2021 · Series: Serie 5
More machines from model year 2021
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Landini Series 5 – the Series 5-085: a four-cylinder diesel producing 56 kW with four-wheel drive and a 3,700 kg operating weight as a modern all-purpose tractor from 2021
Landini is an Italian tractor manufacturer based in Fabbrico in the province of Reggio Emilia, now part of the Argo Tractors group. The Series 5-085, built in 2021, is recorded with four-wheel drive spelled out in full, rather than the "doppia trazione" abbreviation more commonly seen on older Italian type designations.
Read on 3 more paragraphs
The Series 5-085 is fitted with a four-cylinder diesel engine of 3,400 cm3 displacement, producing 56 kW, or 75 hp. At a weight of 3,700 kg the machine reaches a top speed of 40 km/h. The wheelbase measures 2,171 mm and the overall height 2,485 mm, noticeably larger dimensions than the older three-cylinder Landini series.
At a built-in top speed of 40 km/h, the machine sits right at the edge of the German L licence category, which covers vehicles up to 40 km/h, while the T category permits up to 60 km/h. Four-wheel drive spreads pulling force across both axles and improves traction on loose or wet ground, the PTO shaft runs at the standard 540 or 1,000 rpm, and the three-point linkage follows ISO 730.
When buying a used, modern four-wheel-drive tractor of this class, an electronic engine and transmission diagnostic check belongs on the list, along with the number of recorded hours relative to the build year, the condition of the front axle boots and tyres, and a complete service history, since on a younger machine missing maintenance records are a stronger warning sign than on a historic series.
Sources: SpecCodex-Register: Kennwerte des Modells Serie 5-085
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 75 hp (56 kW)correct |
| Cylinders | 4correct |
| Displacement | 3,400 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Height | 2,485 mmcorrect |
|---|---|
| Wheelbase | 2,171 mmcorrect |
| Unladen weight | 3,700 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Top speed | 40 km/hcorrect |
Where this model stands
Power-to-weight ratio: 15.1 kW/t (56 kW / 3.7 t)
Power class: Universal (40–100 hp)
Stronger than 53% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Landini Serie 5-085 have?
The Landini Serie 5-085 delivers 75 hp.
How much does the Landini Serie 5-085 weigh?
The unladen weight is 3,700 kg.
What engine does the Landini Serie 5-085 have?
4 cylinders, 3,400 cm³ displacement, Diesel.
How fast does the Landini Serie 5-085 go?
Top speed is 40 km/h.
When was the Landini Serie 5-085 built?
Production years: 2021.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
