Landini Powervision 90
Series: Powervision
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Landini Powervision – the four-cylinder range 80, 90, 100 and 110 from Fabbrico: 4.4 litres displacement, 54 to 75 kW, uniform 3,450 kg unladen weight
Powervision is Landini's compact mid-class with the four models 80, 90, 100 and 110, whose numbers, as with the other Power ranges, denote the hp class. The range shares the 4.4-litre four-cylinder diesel with the Powermondial range but is laid out as a more compact cabin version for the European market.
Read on 4 more paragraphs
The register lists here 4 versions with 54.5 to 74.9 kW or 74 to 101.9 hp from the uniform four-cylinder of 4,400 cm³ displacement. Unladen weight is uniformly 3,450 kg, length lies between 4,136 and 4,160 mm, width between 1,945 and 2,110 mm and height between 2,518 and 2,563 mm.
As a versatile mid-class for mixed farms between arable, livestock and municipal work, the Powervision competes directly with comparable four-cylinder ranges from New Holland, Deutz-Fahr and Case IH in the same power window.
On a used example, clutch and gearbox condition, hydraulic and PTO tightness, wear of the cab mounts, and rust on mudguards and bonnet count; parts for the four-cylinder diesel run through the Landini-Argo network.
With outputs from 54.5 kW, the Powervision range falls within three-point category II under ISO 730, and the PTO runs two-speed at 540 and 1,000 rpm. The more compact cab visibly distinguishes the Powervision from the identically powered Powermondial. When buying used, it is therefore worth comparing both ranges if cab shape does not matter.
Sources: SpecCodex register, model data: Landini Powervision, Landini
Technical data
Engine
| Power | 83 hp (61 kW)correct |
|---|---|
| Cylinders | 4correct |
| Displacement | 4,400 cm³correct |
Dimensions and weights
| Length | 4,136 mmcorrect |
|---|---|
| Width | 1,945 mmcorrect |
| Height | 2,518 mmcorrect |
| Wheelbase | 2,365 mmcorrect |
| Unladen weight | 3,450 kgcorrect |
Drivetrain and chassis
| Front tyres | 11.2-24correct |
|---|---|
| Rear tyres | 16.9-30correct |
Working data
| Fuel tank capacity | 102 lcorrect |
|---|
Where this model stands
Power-to-weight ratio: 17.7 kW/t (61 kW / 3.5 t)
Power class: Universal (40–100 hp)
Stronger than 57% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Landini Powervision 90 have?
The Landini Powervision 90 delivers 83 hp.
How much does the Landini Powervision 90 weigh?
The unladen weight is 3,450 kg.
What engine does the Landini Powervision 90 have?
4 cylinders, 4,400 cm³ displacement.
What are the dimensions of the Landini Powervision 90?
4,136 mm × 1,945 mm × 2,518 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
