Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Lamborghini › Spark 130

Lamborghini Spark 130

Series: Spark

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Spark 130, Lamborghini offers a model from the Spark series. The engine delivers 120 hp (88 kW), has 4 cylinders, with a displacement of 3,849 cm³. The machine is 1,890 mm wide. The unladen weight is 5,600 kg. Lifting capacity is 5,000 kg. The engine is water-cooled. The fuel is diesel. The fuel is diesel. The rated output is 88. The Spark series covers 6 models. Rated output within it ranges from 120 to 166 hp; the Spark 130 sits at the bottom of that range with 120 hp. Its immediate neighbours are the Spark 130.4 above it with 128 hp. Unladen weight within it ranges from 5,500 to 5,710 kg; here the Spark 130 sits in the middle of that range with 5,600 kg. 136 Lamborghini models across 28 series are on record.

Lamborghini Spark - four-cylinder tractors with the power class in the name: 120.4 to 160.4, 87 to 122 kW, .4 for the four-cylinder engine, kerb weights around 5.5 to 5.7 t

Lamborghini Trattori, founded in 1958 by Ferruccio Lamborghini before he entered sports-car production, has belonged to the SDF group (Same Deutz-Fahr) since 1973 and builds its tractors in Emilia-Romagna. The Spark series carries its power class directly in the name: the three-digit number gives the approximate horsepower - Spark 120.4 around 120 hp, Spark 160.4 around 160 hp - while the .4 suffix denotes the four-cylinder engine fitted to every version in the series.

Read on 3 more paragraphs

The register lists 6 versions with 87 to 122 kW from four-cylinder engines of 3,849 to 4,038 cm³, torque of 481 to 672 Nm, kerb weights of 5,500 to 5,710 kg and a width of 1,890 to 2,200 mm; every model runs on diesel.

Within Lamborghini's range, the Spark occupies the upper mid-class for arable farms, with four-wheel drive and cab suspension as standard equipment for long working days in the field. As a sister brand to Same, Deutz-Fahr and Hurlimann, Lamborghini shares platforms and components within the SDF group while presenting its own design and the bull in its logo on the market.

On a used example of these four-cylinder diesels, check the turbocharger and injection system, the clutch and power-shift transmission, four-wheel drive and front-axle joints, the hydraulic pump and valves, and cab suspension and seals; parts run through the SDF dealer network and partly overlap with Same and Deutz-Fahr components.

Sources: SpecCodex register, model data: Lamborghini Spark, Lamborghini Trattori (manufacturer)

Technical data

Engine

Fueldieselcorrect
Fueldieselcorrect
Power120 hp (88 kW)correct
Rated output88 kWcorrect
Cylinders4correct
Displacement3,849 cm³correct
Displacement3849 cm³correct
Coolingwater-cooledcorrect
Cooling systemWassercorrect

Dimensions and weights

Width1,890 mmcorrect
Unladen weight5,600 kgcorrect

Drivetrain and chassis

Drive typeGetriebecorrect

Working data

Lifting capacity5,000 kgcorrect

Other data

Hydrauliksystem120 l/mincorrect
Kraftheberbearbeiten offenes hydrauliksystem90 l/mincorrect
Lifting capacity5000 kgcorrect
Standard tyresMotorcorrect
Steuergerätebearbeiten offen3 dwcorrect

Where this model stands

Power-to-weight ratio: 15.7 kW/t (88 kW / 5.6 t)

Power class: Large (100–180 hp)

Stronger than 74% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Lamborghini Spark 130 have?

The Lamborghini Spark 130 delivers 120 hp.

How much does the Lamborghini Spark 130 weigh?

The unladen weight is 5,600 kg.

What engine does the Lamborghini Spark 130 have?

4 cylinders, 3,849 cm³ displacement, Diesel.

How much does the rear linkage of the Lamborghini Spark 130 lift?

The rear linkage lifts 5,000 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare