Lamborghini R7.210

Series: R7

Source: https://www.lectura-specs.com/en/model/agricultural-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The R7.210 from Lamborghini is part of the R7 series. The engine delivers 213 hp (157 kW), has 6 cylinders, with a displacement of 7,146 cm³. The engine comes from Deutz. The machine is 4,800 mm long, 2,550 mm wide and 3,020 mm high. The unladen weight is 7,520 kg. The wheelbase measures 2,985 mm. Top speed is 40 km/h. The engine is water-cooled. Tyres: rear 650/65 R 42. The model was built in Italy. The fuel is diesel. Rated output across the Lamborghini range ranges from 15 to 269 hp; the R7.210 sits in the upper part of that range with 213 hp. Its immediate neighbours are the VRT.190 below it with 203 hp and the R8.230 above it with 244 hp. Rated output across the Lamborghini range ranges from 15 to 269 hp; here the R7.210 sits in the upper part of that range with 210 hp. 136 Lamborghini models across 28 series are on record.

Lamborghini R7.210 – water-cooled six-cylinder Deutz diesel producing 210 hp from 7,146 cc, with a kerb weight of 7,520 kg, a heavy field tractor from Lamborghini Trattori

Lamborghini Trattori was an Italian tractor manufacturer founded by Ferruccio Lamborghini before he became known for sports cars; the brand has belonged to the SAME group (today SDF, SAME Deutz-Fahr) since the 1970s, which also includes the engine maker Deutz. The R7.210 is a heavy six-cylinder tractor with a Deutz engine, built for professional arable farming.

Read on 3 more paragraphs

The R7.210 is powered by a water-cooled six-cylinder Deutz diesel engine of 7,146 cc, producing 210 hp (157 kW). At a kerb weight of 7,520 kg it measures 4,800 mm in length, 2,550 mm in width and 3,020 mm in height, on a 2,985 mm wheelbase; top speed is 40 km/h.

A six-cylinder of just over seven litres with more than 200 hp belongs in the class of heavy field tractors for ploughing and cultivating over large areas, as well as for haulage with heavy trailers; at over 7.5 tonnes kerb weight it brings enough traction for wide tillage implements. Water cooling at this engine size depends on a large, well-ventilated radiator.

When buying a used heavy R7.210, the radiator and the condition of the hoses are among the first things to check, as an engine of this size is sensitive to overheating. Gearbox, clutch and rear axle should be checked under load, and the hydraulic system for tightness. Parts for the Deutz engine are available through the open market for Deutz power units, in addition to specialist Lamborghini dealers.

Sources: SpecCodex-Register: Kennwerte des Modells Lamborghini R7.210

Technical data

Engine

Engine make	Deutzcorrect
Fuel	dieselcorrect
Power	213 hp (157 kW)correct
Cylinders	6correct
Displacement	7,146 cm³correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	4,800 mmcorrect
Width	2,550 mmcorrect
Height	3,020 mmcorrect
Wheelbase	2,985 mmcorrect
Unladen weight	7,520 kgcorrect

Drivetrain and chassis

Drive	selectable four-wheel drivecorrect
Rear tyres	650/65 R 42correct
Top speed	40 km/hcorrect

Origin and approval

Plant	Italycorrect

Where this model stands

Power-to-weight ratio: 20.9 kW/t (157 kW / 7.5 t)

Power class: Heavy (> 180 hp)

Stronger than 92% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Lamborghini R7.210 have?

The Lamborghini R7.210 delivers 213 hp.

How much does the Lamborghini R7.210 weigh?

The unladen weight is 7,520 kg.

What engine does the Lamborghini R7.210 have?

6 cylinders, 7,146 cm³ displacement, Diesel.

How fast does the Lamborghini R7.210 go?

Top speed is 40 km/h.

What are the dimensions of the Lamborghini R7.210?

4,800 mm × 2,550 mm × 3,020 mm.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.