Start › Tractors › Lamborghini › R3.EVO › R3.EVO.100

Lamborghini R3.EVO.100

Built: Year not documented · Series: R3.EVO

Source: https://www.lectura-specs.com/en/model/agricultural-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The R3.EVO series from Lamborghini includes the R3.EVO.100. The engine delivers 96 hp (70.5 kW), has 4 cylinders, with a displacement of 4,038 cm³. The machine is 3,950 mm long, 2,050 mm wide and 2,790 mm high. The unladen weight is 3,400 kg. The wheelbase measures 2,245 mm. Ground clearance is 500 mm. Top speed is 40 km/h. Tyres: rear 16.9 R 34. The fuel is diesel. Rated output across the Lamborghini range ranges from 15 to 269 hp; the R3.EVO.100 sits in the lower part of that range with 96 hp. Its immediate neighbours are the R2.100 below it with 95 hp and the R6.100 above it with 100 hp. Rated output across the Lamborghini range ranges from 15 to 269 hp; here the R3.EVO.100 sits in the lower part of that range with 96 hp. 136 Lamborghini models across 28 series are on record.

Lamborghini R3.EVO series: agricultural tractors from Cento/Pieve di Cento, from the R3.EVO.100 to the R3.EVO.110, 70.5 to 80 kW (96 to 109 hp) from four-cylinder diesel engines of 4,038 cm³

Lamborghini Trattori was founded in 1948 by Ferruccio Lamborghini in Cento and has been part of the SAME group since 1972, which builds the tractors at the Pieve di Cento plant. This page collects the R3.EVO series, from the R3.EVO.100 to the R3.EVO.110; the numbers 100 and 110 give the approximate horsepower, and EVO marks the further-developed generation of the R3 series.

Read on 3 more paragraphs

The register lists 2 versions from 70.5 to 80 kW (96 to 109 hp) from four-cylinder diesel engines of 4,038 cm³ displacement. Kerb weights range from 3,400 to 4,100 kg, lengths from 3,950 to 3,990 mm, with a width of 2,050 mm and heights from 2,580 to 2,790 mm.

Tractors of this power class cover the mid-range agricultural-tractor segment at Lamborghini and are aimed at operations with mixed use spanning tillage, front-loader work and haulage; they compete with sister brands Same and Deutz-Fahr as well as with comparable models from John Deere, Case IH and Fendt.

When buying a used example, check operating hours and the service history of engine and injection pump, the condition of clutch and gearbox, the tightness of the hydraulics and front power take-off, and corrosion on cab and wings; since the engineering is largely shared with Same and Deutz-Fahr, spare-parts supply through the SDF dealer network is comparatively good.

Sources: SpecCodex register, model data: Lamborghini R3.EVO, Lamborghini Trattori (manufacturer)

Technical data

Engine

Fuel	dieselcorrect
Power	96 hp (70.5 kW)correct
Cylinders	4correct
Displacement	4,038 cm³correct

Dimensions and weights

Length	3,950 mmcorrect
Width	2,050 mmcorrect
Height	2,790 mmcorrect
Wheelbase	2,245 mmcorrect
Ground clearance	500 mmcorrect
Unladen weight	3,400 kgcorrect

Drivetrain and chassis

Drive	rear- or four-wheel drivecorrect
Rear tyres	16.9 R 34correct
Top speed	40 km/hcorrect

Where this model stands

Power-to-weight ratio: 20.7 kW/t (70 kW / 3.4 t)

Power class: Universal (40–100 hp)

Stronger than 64% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Lamborghini R3.EVO.100 have?

The Lamborghini R3.EVO.100 delivers 96 hp.

How much does the Lamborghini R3.EVO.100 weigh?

The unladen weight is 3,400 kg.

What engine does the Lamborghini R3.EVO.100 have?

4 cylinders, 4,038 cm³ displacement, Diesel.

How fast does the Lamborghini R3.EVO.100 go?

Top speed is 40 km/h.

What are the dimensions of the Lamborghini R3.EVO.100?

3,950 mm × 2,050 mm × 2,790 mm.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →