Lamborghini / AGCO 240 TRACTION
Built: 1993–1994 · Series: TRACTION-Baureihe
More machines from model year 1993
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lamborghini Traction series: heavy agricultural tractors from Cento/Pieve di Cento, from the 240 TRACTION to the 265 TRACTION, 179.5 to 193.4 kW from six-cylinder diesel engines of 8,268 cm³
Lamborghini Trattori was founded in 1948 by Ferruccio Lamborghini in Cento and has been part of the SAME group since 1972, which builds the tractors at the Pieve di Cento plant. This page collects the Traction series, from the 240 TRACTION to the 265 TRACTION; the leading number gives the approximate horsepower, and the name itself points to the series' high pulling power.
Read on 3 more paragraphs
The register lists 2 versions from 179.5 to 193.4 kW from six-cylinder diesel engines of 8,268 cm³ displacement and 895 to 956 Nm of torque at 2,000 to 2,200 rpm. Kerb weights range from 8,901 to 9,014 kg, with a length of 4,928 mm, a width of 2,440 mm and a height of 3,145 mm.
Tractors of this power class form the top of Lamborghini's agricultural-tractor range and are built for the heaviest tillage, cultivator work and hauling large trailer loads; they compete with comparable large tractors from Fendt, John Deere, Case IH and New Holland. The high kerb weight and large displacement give smooth running and strong pulling performance even under continuous load in cultivator and plough work on heavy soils.
When buying a used example, check operating hours and the service history of engine, turbocharger and injection system, the condition of clutch and gearbox, the tightness of the hydraulics, and corrosion on frame, cab and wings; on such heavy machines it is also worth checking tyre condition and axle-load distribution. Given the large trailed weights involved, the braking system and tow hitch also deserve particular attention.
Sources: SpecCodex register, model data: Lamborghini Traction-Baureihe, Lamborghini Trattori (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 244 hp (179.5 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 956 Nmcorrect |
| Speed at max. torque | 1,600 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 8,268 cm³correct |
| Bore | 114 mmcorrect |
| Stroke | 135 mmcorrect |
| Compression ratio | 16.5correct |
| Injection pressure | 205 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,928 mmcorrect |
|---|---|
| Width | 2,440 mmcorrect |
| Height | 3,145 mmcorrect |
| Wheelbase | 2,950 mmcorrect |
| Ground clearance | 376 mmcorrect |
| Unladen weight | 8,901 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 18 V/9 R or 36 V/18 Rcorrect |
| Front tyres | 16.9 R 30 AScorrect |
| Rear tyres | 20.8 R 42 AScorrect |
| Top speed | 40 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 20.2 kW/t (180 kW / 8.9 t)
Power class: Heavy (> 180 hp)
Stronger than 95% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Lamborghini / AGCO 240 TRACTION have?
The Lamborghini / AGCO 240 TRACTION delivers 244 hp.
How much does the Lamborghini / AGCO 240 TRACTION weigh?
The unladen weight is 8,901 kg.
What engine does the Lamborghini / AGCO 240 TRACTION have?
6 cylinders, 8,268 cm³ displacement, Diesel.
How fast does the Lamborghini / AGCO 240 TRACTION go?
Top speed is 40 km/h.
What are the dimensions of the Lamborghini / AGCO 240 TRACTION?
4,928 mm × 2,440 mm × 3,145 mm.
When was the Lamborghini / AGCO 240 TRACTION built?
Production years: 1993–1994.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
