Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Lamborghini › 660 › 660 (DT)

Lamborghini 660 (DT)

Built: 1986–1997 · Series: 660

More machines from model year 1986

Wikimedia Commons · CC BY-SA 4.0 · Flexman · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 660 (DT), Lamborghini offers a model from the 660 series. Production: 1986–1997. The engine delivers 60 hp (44.1 kW), has 3 cylinders, with a displacement of 3,117 cm³. Torque is 195 Nm. Rated speed is 2,200 rpm. The machine is 3,130 mm long, 1,675 mm wide and 2,290 mm high. The unladen weight is 2,280 kg. The wheelbase measures 2,090 mm. Ground clearance is 470 mm. Top speed is 30 km/h. Transmission: 12 V/3 R and 16 V/4 R. The engine is air-cooled. Tyres: front 7.50-16 ASF (DT: 11.2-20 AS), rear 14.9-28 AS. The fuel is diesel. The bore measures 98 mm. The stroke is 120 mm. The compression ratio is 17:1. Maximum torque is reached at 1,412 rpm. Construction: unit construction (no separate frame). Injection pressure is 210 bar. Rated output across the Lamborghini range ranges from 15 to 269 hp; the 660 (DT) sits in the lower part of that range with 60 hp. Its immediate neighbours are the R-603 (DT) below it with 56 hp and the R-653 (DT) above it with 62 hp. Rated output across the Lamborghini range ranges from 11.1 to 198 kW; here the 660 (DT) sits in the lower part of that range with 44.1 kW. 136 Lamborghini models across 28 series are on record.

Lamborghini 660 (DT) – air-cooled three-cylinder diesel producing 60 hp at 2,200 rpm from 3,117 cc, with four-wheel drive (doppia trazione), a general-purpose tractor from Lamborghini Trattori

Lamborghini Trattori was an Italian tractor manufacturer founded by Ferruccio Lamborghini before he became known for sports cars; the tractor business stayed independent after the car marque was sold and has belonged to the SAME group (today SDF, SAME Deutz-Fahr) since the 1970s. The 660 (DT) is a four-wheel-drive general-purpose tractor from the 1980s and 1990s range, built for medium-heavy to heavy field work; Italian makers use DT for doppia trazione.

Read on 3 more paragraphs

The 660 (DT) is powered by an air-cooled three-cylinder diesel engine of 3,117 cc, producing 60 hp (44.1 kW) at 2,200 rpm with 195 Nm of torque. At a kerb weight of 2,280 kg it measures 3,130 mm in length, 1,675 mm in width and 2,290 mm in height, on a 2,090 mm wheelbase; top speed is 30 km/h.

With just over three litres of displacement and four-wheel drive, this three-cylinder is built for tillage with heavier implements, mowing on uneven ground and haulage with full trailers. Four-wheel drive keeps traction up on wet soil and gentle slopes, but in turn calls for regular checks of the front axle and the extra joints.

When buying a used air-cooled four-wheel-drive Lamborghini of this size, check the cooling fins, the cooling fan and the cylinder head gaskets, since leaks are harder to spot with air cooling than with water cooling. The front axle bearings and the four-wheel-drive joint boots should be checked for play and cracks. Parts for this widely used engine and driveline family are usually readily available through specialist dealers.

Sources: SpecCodex-Register: Kennwerte des Modells Lamborghini 660 (DT)

Technical data

Engine

Fueldieselcorrect
Power60 hp (44.1 kW)correct
Rated speed2,200 rpmcorrect
Torque195 Nmcorrect
Speed at max. torque1,412 rpmcorrect
Cylinders3correct
Displacement3,117 cm³correct
Bore98 mmcorrect
Stroke120 mmcorrect
Compression ratio17correct
Injection pressure210 barcorrect
Coolingair-cooledcorrect

Dimensions and weights

Length3,130 mmcorrect
Width1,675 mmcorrect
Height2,290 mmcorrect
Wheelbase2,090 mmcorrect
Ground clearance470 mmcorrect
Unladen weight2,280 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox12 V/3 R and 16 V/4 Rcorrect
Front tyres7.50-16 ASF (DT: 11.2-20 AS)correct
Rear tyres14.9-28 AScorrect
Top speed30 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 19.3 kW/t (44 kW / 2.3 t)

Power class: Universal (40–100 hp)

Stronger than 41% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Lamborghini 660 (DT) have?

The Lamborghini 660 (DT) delivers 60 hp.

How much does the Lamborghini 660 (DT) weigh?

The unladen weight is 2,280 kg.

What engine does the Lamborghini 660 (DT) have?

3 cylinders, 3,117 cm³ displacement, Diesel.

How fast does the Lamborghini 660 (DT) go?

Top speed is 30 km/h.

What are the dimensions of the Lamborghini 660 (DT)?

3,130 mm × 1,675 mm × 2,290 mm.

When was the Lamborghini 660 (DT) built?

Production years: 1986–1997.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare