Lahrs TPA 10,5 / 6 2 E
Built: 1991 · Series: Other models
More machines from model year 1991
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lahrs TPA 10,5 / 6 2 E – O3-class drawbar trailer with 9,000 kg gross weight, 2,850 kg unladen weight and 8,040 mm length.
Between the ordinary car trailer and the semi-trailer sits the class of heavy drawbar trailers with a gross weight between 3.5 and 10 tonnes. They are pulled by a stand-alone lorry or a suitable tractor unit, carry no drive of their own, and add loading area to a combination without needing a second articulated unit.
Read on 3 more paragraphs
The TPA 10,5 / 6 2 E carries a gross weight of 9,000 kg. Against an unladen weight of 2,850 kg that leaves a payload of 6,150 kg. Body length is 8,040 mm, width 2,520 mm – a ratio typical of a multi-axle trailer in the mid payload class for general haulage.
At 9,000 kg gross weight the TPA 10,5 / 6 2 E falls into EU trailer class O3, and so carries an air brake system from the factory rather than the simple overrun brake fitted to lighter trailers. Towing it requires at least driving licence category BE or C1E depending on the combined weight of the outfit.
When buying a used trailer in this weight class, check the air brake system: brake cylinders, lines and coupling heads should be free of corrosion, and leaks show up as pressure loss after parking. On the chassis, fatigue shows first on the cross members and at the axle mounting points; on the drawbar, check play in the towing eye and the operation of the jockey wheel, and look for uneven tyre wear that points to a bent axle.
Sources: SpecCodex-Register: Kennwerte des Modells TPA 10,5 / 6 2 E
Technical data
Dimensions and weights
| Length | 8,040 mmcorrect |
|---|---|
| Width | 2,520 mmcorrect |
| Wheelbase | 1,320 mmcorrect |
| Unladen weight | 2,850 kgcorrect |
| Gross vehicle weight | 9,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Lahrs TPA 10,5 / 6 2 E weigh?
The unladen weight is 2,850 kg.
What is the gross vehicle weight of the Lahrs TPA 10,5 / 6 2 E?
9,000 kg.
Up to what speed is the Lahrs TPA 10,5 / 6 2 E approved?
Approved up to 100 km/h.
What are the dimensions of the Lahrs TPA 10,5 / 6 2 E?
8,040 mm × 2,520 mm.
When was the Lahrs TPA 10,5 / 6 2 E built?
Production years: 1991.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
