Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Kubota › M7040 Narrow

Kubota M7040 Narrow

Series: M7040

The photo shows the M7040 from the same series. Source: https://kubota.com.ph/product/m7040/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the M7040 Narrow, Kubota offers a model from the M7040 series. The engine delivers 62 hp (46 kW). The engine comes from Kubota. The engine is water-cooled. The model was built in Japan. The fuel is diesel. The M7040 series covers 5 models. Rated output within it ranges from 46 to 50 kW; the M7040 Narrow sits at the bottom of that range with 46 kW. Its immediate neighbours are the M7040 above it with 50 kW. 1112 Kubota models across 46 series are on record.

Kubota M7040 – a Japanese mid-range tractor: Kubota's own four-cylinder V3307-DI, 46 to 50 kW, also as the narrow-track Narrow version

Kubota builds the M7040 in Japan as part of the M series, the manufacturer's mid to upper power class between compact and large tractors. It is powered by Kubota's own V3307-DI, a four-cylinder direct-injection diesel engine. Alongside the standard version, the register lists the M7040 N and M7040 Narrow, a narrow-track variant for orchard and row-crop work in which track width and bodywork are tailored to tight row spacing.

Read on 3 more paragraphs

The register lists here 5 versions with 46 to 50 kW (62 hp) from four-cylinders of 3,326.6 cm³, unladen weights of 2,030 to 2,090 kg, a lift capacity of 1,500 kg, lengths of 3,450 to 3,570 mm and a PTO output of 62 hp at 2,600 revolutions per minute.

The M series marks Kubota's entry into the larger tractor class and competes there with John Deere, Massey Ferguson and New Holland; the narrow-track M7040 targets orchard and vineyard operations outside Japan in particular, while the standard version serves as an all-round tractor for larger farms.

When buying used, what counts is operating hours and the service history of the injection pump, the condition of the clutch and front hydraulics, and, on the Narrow version, wear on the narrower axles and wings; Kubota maintains a dense spare parts network that also covers older M-series tractors well. It is also worth checking the condition of the front drive axle and tyres.

Sources: SpecCodex register, model data: Kubota M7040, Kubota (manufacturer)

Technical data

Engine

Engine makeKubotacorrect
Fueldieselcorrect
Power62 hp (46 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantJapancorrect

Frequently asked questions

How much power does the Kubota M7040 Narrow have?

The Kubota M7040 Narrow delivers 62 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare