Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Kubota › MK › MK 5000 ROPS

Kubota MK 5000 ROPS

Series: MK

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The MK series from Kubota includes the MK 5000 ROPS. The engine delivers 48 hp (36 kW), has 4 cylinders, with a displacement of 2,434 cm³. Rated speed is 2,300 rpm. The machine is 3,245 mm long, 1,465 mm wide and 2,540 mm high. The unladen weight is 1,685 kg. The wheelbase measures 1,895 mm. Ground clearance is 425 mm. Top speed is 33 km/h. The engine is water-cooled. Tyres: front 280/70R18, rear 380/70R28. The fuel is diesel. Rated output across the Kubota range ranges from 7.8 to 170.3 hp; the MK 5000 ROPS sits in the lower part of that range with 48 hp. Its immediate neighbours are the L4630HST below it with 47.9 hp and the KX057-4A1 above it with 48.3 hp. Rated output across the Kubota range ranges from 5.6 to 125.3 kW; here the MK 5000 ROPS sits in the lower part of that range with 36 kW. 1112 Kubota models across 46 series are on record.

Kubota MK 5000 ROPS: four-cylinder diesel with 36 kW and an open roll-over protective structure instead of an enclosed cab

The MK 5000 ROPS belongs to Kubota's MK series and is fitted with an open roll-over protective structure rather than an enclosed cab, a common arrangement for many uses away from road travel.

Read on 3 more paragraphs

The MK 5000 is powered by a water-cooled four-cylinder diesel engine of 2,434 cm³ displacement, delivering 36 kW, or 48 hp, at 2,300 rpm. At a kerb weight of 1,685 kg, the tractor is 3,245 mm long, 1,465 mm wide and 2,540 mm high, with a wheelbase of 1,895 mm. Its design top speed is 33 km/h.

At 33 km/h, the MK 5000 falls into driving licence category L. The roll-over protective structure (ROPS) protects the operator in the event of a rollover but replaces neither the weather protection nor the noise insulation of an enclosed cab — a design well suited to outdoor work on a modest budget. The four-cylinder engine at 2.4 litres sits between Kubota's small three-cylinder and large six-cylinder units in output.

When buying a tractor fitted with a roll bar, checking the ROPS frame for cracks, damaged welds and loose or missing mounting bolts is especially important, since this component must protect the operator in an emergency. The clutch, gearbox and the tightness of the hydraulic cylinders also belong on the usual checklist, along with the condition of the seat and its mounting, which take more direct wear and weathering on an open tractor than in an enclosed cab.

Sources: SpecCodex-Register: Kennwerte des Modells Kubota MK 5000 ROPS, Kubota (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power48 hp (36 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement2,434 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,245 mmcorrect
Width1,465 mmcorrect
Height2,540 mmcorrect
Wheelbase1,895 mmcorrect
Ground clearance425 mmcorrect
Unladen weight1,685 kgcorrect

Drivetrain and chassis

Front tyres280/70R18correct
Rear tyres380/70R28correct
Top speed33 km/hcorrect

Where this model stands

Power-to-weight ratio: 21.4 kW/t (36 kW / 1.7 t)

Power class: Universal (40–100 hp)

Stronger than 33% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota MK 5000 ROPS have?

The Kubota MK 5000 ROPS delivers 48 hp.

How much does the Kubota MK 5000 ROPS weigh?

The unladen weight is 1,685 kg.

What engine does the Kubota MK 5000 ROPS have?

4 cylinders, 2,434 cm³ displacement, Diesel.

How fast does the Kubota MK 5000 ROPS go?

Top speed is 33 km/h.

What are the dimensions of the Kubota MK 5000 ROPS?

3,245 mm × 1,465 mm × 2,540 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare