Kubota M6800 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Kubota M6800 belongs to the Kubota 4WD Tractor series. Under the bonnet works a four-cylinder engine displacing 3.3 litres, producing 72 hp (52.9 kW). Rated power arrives at 2,600 rpm — the engine pulls from low down rather than needing to be revved.
Unladen, it tips the scales at 2,800 kg.
Within the range, rated power spans from 18.2 to 116 hp; with 71.9 hp, the M6800 sits at the top. Directly alongside are the M5700 with 62.5 hp below and the M8200 with 86.5 hp above.
Technical data
Engine
| Engine model | V3300-Ecorrect |
|---|---|
| Power | 71.9 hp (52.9 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,310.2 cm³correct |
| Aspiration | E-TVCS liquid cooledcorrect |
| Coolant capacity | 8.7 lcorrect |
| Engine oil capacity | 11 lcorrect |
Dimensions and weights
| Ground clearance | 460.2correct |
|---|---|
| Unladen weight | 2,800 kgcorrect |
Drivetrain and chassis
| Gearbox type | fully synchromesh gearboxcorrect |
|---|---|
| Forward gears | 8correct |
| Reverse gears | 8correct |
| Tyre size | front 9.5-24R1 rear 16.9-30R1correct |
| System voltage | 12 Vcorrect |
Working data
| Pump flow | 64.7 l/mincorrect |
|---|---|
| Fuel tank capacity | 95 lcorrect |
Other data
| Height | 2,520.7correct |
|---|
Where this model stands
Power-to-weight ratio: 18.9 kW/t (53 kW / 2.8 t)
Power class: Universal (40–100 hp)
Stronger than 51% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Kubota M6800 have?
The Kubota M6800 delivers 71.9 hp.
How much does the Kubota M6800 weigh?
The unladen weight is 2,800 kg.
What engine does the Kubota M6800 have?
4 cylinders, 3,310 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.