Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Kubota › M5091

Kubota M5091

Built: 2016 · Series: M5001

More machines from model year 2016

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the M5091, Kubota offers a model from the M5001 series. Production: 2016. The engine delivers 95 hp (71 kW), has 4 cylinders, with a displacement of 3,769 cm³. Rated speed is 2,600 rpm. The machine is 4,045 mm long, 2,195 mm wide and 2,645 mm high. The unladen weight is 3,420 kg. The wheelbase measures 2,250 mm. Top speed is 40 km/h. The engine is water-cooled. Tyres: front 360/70R24, rear 480/70R34. The fuel is diesel. The gearbox offers 36 forward gears. Rated output across the Kubota range ranges from 7.8 to 170.3 hp; the M5091 sits in the middle of that range with 95 hp. Its immediate neighbours are the M5-091HDRC12 below it with 93.8 hp and the M5N-091HDC12PK above it with 96.3 hp. Rated output across the Kubota range ranges from 21 to 150 hp; here the M5091 sits in the middle of that range with 95 hp. 1112 Kubota models across 46 series are on record.

Kubota M5091 (M5001 series), built in 2016: four-cylinder diesel with 71 kW for the upper mid-range of standard tractors

The M5091, built in 2016, belongs to the upper mid-range of Kubota's standard tractors, with four cylinders and nearly 3.8 litres of displacement, a step above the more compact M4000 models.

Read on 3 more paragraphs

The M5091 is powered by a water-cooled four-cylinder diesel engine of 3,769 cm³ displacement, delivering 71 kW, or 95 hp, at 2,600 rpm. At a kerb weight of 3,420 kg, the tractor is 4,045 mm long, 2,195 mm wide and 2,645 mm high, with a wheelbase of 2,250 mm. Its design top speed is 40 km/h.

At 40 km/h, the M5091 reaches the upper limit of driving licence category L. Built in 2016 with 71 kW, it falls within the scope of EU emission stage IV for mobile machinery. In this power class around 70 kW, a tractor covers the broad range from soil cultivation and seeding to transport work with larger trailers and driving power-hungry PTO implements such as mulchers or rotary harrows.

When buying a tractor with emission stage IV, checking the exhaust aftertreatment — the particulate filter or SCR catalyst — for fault codes and unusual urea consumption is among the most important steps. The hydraulic pump, clutch and PTO drive shafts should also be checked for wear. The radiator and coolant deserve a look too, since engines with exhaust aftertreatment are more sensitive to overheating than older designs without this technology.

Sources: SpecCodex-Register: Kennwerte des Modells Kubota M5091, Kubota (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power95 hp (71 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement3,769 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,045 mmcorrect
Width2,195 mmcorrect
Height2,645 mmcorrect
Wheelbase2,250 mmcorrect
Unladen weight3,420 kgcorrect

Drivetrain and chassis

Forward gears36correct
Front tyres360/70R24correct
Rear tyres480/70R34correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 20.8 kW/t (71 kW / 3.4 t)

Power class: Universal (40–100 hp)

Stronger than 64% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota M5091 have?

The Kubota M5091 delivers 95 hp.

How much does the Kubota M5091 weigh?

The unladen weight is 3,420 kg.

What engine does the Kubota M5091 have?

4 cylinders, 3,769 cm³ displacement, Diesel.

How fast does the Kubota M5091 go?

Top speed is 40 km/h.

What are the dimensions of the Kubota M5091?

4,045 mm × 2,195 mm × 2,645 mm.

When was the Kubota M5091 built?

Production years: 2016.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare