StartTractorsKubota › L4330DT

Kubota L4330DT 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kubota L4330DT is a tractor from the Kubota 4WD Tractor series. The four-cylinder engine, displacing 2.2 litres, produces 44 hp (30.6 kW). With a rated speed of 2,600 rpm, it is built for pulling power, not for revving.

At 26 km/h, that is as fast as it goes. Empty, it weighs 1,560 kg.

Within the range, rated power spans from 18.2 to 116 hp; with 43.8 hp, the L4330DT sits in the mid-field. Directly alongside are the U43 with 43.6 hp below and the L4240DT with 44.6 hp above.

Technical data

Engine

Engine modelL4330 DTcorrect
Power43.8 hp (30.6 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement2,197.5 cm³correct
AspirationE-TVCS indirect injectioncorrect

Dimensions and weights

Ground clearance375.2correct
Unladen weight1,560 kgcorrect

Drivetrain and chassis

Gearbox typeFSTcorrect
Forward gears8correct
Reverse gears8correct
Tyre sizefront 8.3-16 rear 14.9-24correct
Top speed26.2 km/hcorrect
System voltage12 Vcorrect

Working data

Pump flow53.8 l/mincorrect
Fuel tank capacity40.1 lcorrect

Other data

Height2,316.5correct

Where this model stands

Power-to-weight ratio: 19.6 kW/t (31 kW / 1.6 t)

Power class: Universal (40–100 hp)

Stronger than 28% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota L4330DT have?

The Kubota L4330DT delivers 43.8 hp.

How much does the Kubota L4330DT weigh?

The unladen weight is 1,560 kg.

What engine does the Kubota L4330DT have?

4 cylinders, 2,198 cm³ displacement.

How fast does the Kubota L4330DT go?

Top speed is 26.2 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare