StartTractorsKubota › L3830GST

Kubota L3830GST 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kubota L3830GST is a tractor from the Kubota 4WD Tractor series. Power comes from a three-cylinder engine; from 1.8 litres it draws 40 hp (27.9 kW). With a rated speed of 2,700 rpm, it is built for pulling power, not for revving.

At 26 km/h, that is as fast as it goes. Empty, it weighs 1,485 kg.

Within the range, rated power spans from 18.2 to 116 hp; with 39.5 hp, the L3830GST sits in the mid-field. Directly alongside are the R36i with 39 hp below and the L3940DT with 41.1 hp above.

Technical data

Engine

Engine modelL3830 GSTcorrect
Power39.5 hp (27.9 kW)correct
Rated speed2,700 rpmcorrect
Cylinders3correct
Displacement1,827.2 cm³correct
AspirationE-TVCS indirect injectioncorrect

Dimensions and weights

Ground clearance375.2correct
Unladen weight1,485 kgcorrect

Drivetrain and chassis

Gearbox typeGSTcorrect
Forward gears12correct
Reverse gears8correct
Tyre sizefront 8.3-16 rear 14.9-24correct
Top speed25.7 km/hcorrect
System voltage12 Vcorrect

Working data

Pump flow50.3 l/mincorrect
Fuel tank capacity40.1 lcorrect

Other data

Height2,316.5correct

Where this model stands

Power-to-weight ratio: 18.8 kW/t (28 kW / 1.5 t)

Power class: Compact (< 40 hp)

Stronger than 24% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota L3830GST have?

The Kubota L3830GST delivers 39.5 hp.

How much does the Kubota L3830GST weigh?

The unladen weight is 1,485 kg.

What engine does the Kubota L3830GST have?

3 cylinders, 1,827 cm³ displacement.

How fast does the Kubota L3830GST go?

Top speed is 25.7 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare