StartTractorsKubota › L3430DT

Kubota L3430DT Utility

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kubota L3430DT is a tractor from the Kubota Utility Tractor series. The three-cylinder engine, displacing 1.6 litres, produces 34 hp (26.2 kW). Rated power arrives at 2,700 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 27 km/h — a working pace, not a travelling one. It measures 1.52 m across. Unladen, it tips the scales at 1,460 kg.

Within the range, rated power spans from 29.4 to 54.7 hp; with 34.1 hp, the L3430DT sits in the lower third. Directly alongside are the L3130F with 32.5 hp below and the L4400 Gear with 34.3 hp above.

Technical data

Engine

Engine modelL3430 DTcorrect
Power34.1 hp (26.2 kW)correct
Rated speed2,700 rpmcorrect
Cylinders3correct
Displacement1,646.9 cm³correct
AspirationE-TVCS indirect injectioncorrect

Dimensions and weights

Width1,521correct
Wheelbase1,807.5correct
Ground clearance360.2correct
Unladen weight1,460 kgcorrect

Drivetrain and chassis

Gearbox typeFSTcorrect
Forward gears8correct
Reverse gears8correct
Top speed26.7 km/hcorrect
System voltage12 Vcorrect

Working data

Pump flow50.3 l/mincorrect
Fuel tank capacity40.1 lcorrect

Where this model stands

Power-to-weight ratio: 17.9 kW/t (26 kW / 1.5 t)

Power class: Compact (< 40 hp)

Stronger than 23% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota L3430DT have?

The Kubota L3430DT delivers 34.1 hp.

How much does the Kubota L3430DT weigh?

The unladen weight is 1,460 kg.

What engine does the Kubota L3430DT have?

3 cylinders, 1,647 cm³ displacement.

How fast does the Kubota L3430DT go?

Top speed is 26.7 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare