StartTractorsKubota › L2800 Gear

Kubota L2800 Gear Utility

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kubota L2800 Gear is a tractor from the Kubota Utility Tractor series. Power comes from a three-cylinder engine; from 1.4 litres it draws 29 hp (21.6 kW). Rated power arrives at 2,800 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 22 km/h — a working pace, not a travelling one. It measures 1.31 m across. Unladen, it tips the scales at 1,070 kg.

Within the range, rated power spans from 29.4 to 54.7 hp; with 29.4 hp, the L2800 Gear sits at the bottom end. The next one up is the L3130F with 32.5 hp.

Technical data

Engine

Engine modelL2800correct
Power29.4 hp (21.6 kW)correct
Rated speed2,800 rpmcorrect
Cylinders3correct
Displacement1,392.9 cm³correct

Dimensions and weights

Width1,307.6correct
Wheelbase1,612.4correct
Unladen weight1,070 kgcorrect

Drivetrain and chassis

Gearbox typesliding-gear transmission constant-mesh gearboxcorrect
Forward gears8correct
Reverse gears4correct
Top speed22 km/hcorrect
System voltage12 Vcorrect

Working data

Pump flow25 l/mincorrect
Fuel tank capacity34.1 lcorrect

Where this model stands

Power-to-weight ratio: 20.2 kW/t (22 kW / 1.1 t)

Power class: Compact (< 40 hp)

Stronger than 17% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota L2800 Gear have?

The Kubota L2800 Gear delivers 29.4 hp.

How much does the Kubota L2800 Gear weigh?

The unladen weight is 1,070 kg.

What engine does the Kubota L2800 Gear have?

3 cylinders, 1,393 cm³ displacement.

How fast does the Kubota L2800 Gear go?

Top speed is 22 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare