Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Kubota › L4100

Kubota L4100

Series: L

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The L4100 from Kubota is part of the L series. The engine delivers 42 hp (31 kW), has 4 cylinders, with a displacement of 2,197 cm³. The machine is 3,305 mm long, 1,490 mm wide and 2,525 mm high. The unladen weight is 1,464 kg. The wheelbase measures 1,845 mm. Ground clearance is 385 mm. Top speed is 24 km/h. The engine is water-cooled. Tyres: front 8 - 16, rear 13.6 - 26. The fuel is diesel. The gearbox offers 8 forward gears. There are also 4 reverse gears. Rated output across the Kubota range ranges from 7.8 to 170.3 hp; the L4100 sits in the lower part of that range with 42 hp. Its immediate neighbours are the R41 below it with 41.6 hp and the L4060DTRC above it with 42.6 hp. Rated output across the Kubota range ranges from 21 to 150 hp; here the L4100 sits in the lower part of that range with 42 hp. 1112 Kubota models across 46 series are on record.

Kubota L4100: water-cooled four-cylinder diesel with 31 kW and a 24 km/h top speed for compact all-purpose farm and orchard work

Kubota's L series comprises compact all-purpose tractors for smaller and medium-sized operations, orchards and municipal service. The L4100, with four cylinders, sits at the upper end of this power class, above the three-cylinder models that dominate the smaller end of the same range.

Read on 3 more paragraphs

The L4100 is powered by a water-cooled four-cylinder diesel engine of 2,197 cm³ displacement, delivering 31 kW, or 42 hp. At a kerb weight of 1,464 kg, the tractor is 3,305 mm long, 1,490 mm wide and 2,525 mm high, with a wheelbase of 1,845 mm. Its design top speed is 24 km/h.

At a top speed of 24 km/h, the L4100 falls into driving licence category L. The four-cylinder engine runs more smoothly than two- or three-cylinder units, making it more pleasant for extended work with a front loader, mower or rotary tiller. At around 1.5 tonnes kerb weight, ground pressure remains moderate for use on more sensitive land, and the four cylinders keep running smoothly even under light load.

When buying a used four-cylinder compact tractor of this size, it is worth checking the hydraulic pump's delivery, the injectors for even starting behaviour, and the gearbox for shifting noises. Rust on the front fenders and on the frame beneath the battery is a common weak point in this size class and should be checked specifically. The mounting points for a front loader or mower also deserve a look for cracking, since they carry extra stress when implements are swapped frequently.

Sources: SpecCodex-Register: Kennwerte des Modells Kubota L4100, Kubota (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power42 hp (31 kW)correct
Cylinders4correct
Displacement2,197 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,305 mmcorrect
Width1,490 mmcorrect
Height2,525 mmcorrect
Wheelbase1,845 mmcorrect
Ground clearance385 mmcorrect
Unladen weight1,464 kgcorrect

Drivetrain and chassis

Forward gears8correct
Reverse gears4correct
Front tyres8 - 16correct
Rear tyres13.6 - 26correct
Top speed24 km/hcorrect

Where this model stands

Power-to-weight ratio: 21.2 kW/t (31 kW / 1.5 t)

Power class: Universal (40–100 hp)

Stronger than 27% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota L4100 have?

The Kubota L4100 delivers 42 hp.

How much does the Kubota L4100 weigh?

The unladen weight is 1,464 kg.

What engine does the Kubota L4100 have?

4 cylinders, 2,197 cm³ displacement, Diesel.

How fast does the Kubota L4100 go?

Top speed is 24 km/h.

What are the dimensions of the Kubota L4100?

3,305 mm × 1,490 mm × 2,525 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare