StartTractorsKubota › B7510HSD

Kubota B7510HSD 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Kubota B7510HSD belongs to the Kubota 4WD Tractor series. 21 hp (15.7 kW) is what the three-cylinder engine gets out of 1 litres. With a rated speed of 2,600 rpm, it is built for pulling power, not for revving.

At 16 km/h, that is as fast as it goes. Empty, it weighs 620 kg.

Within the range, rated power spans from 18.2 to 116 hp; with 21.3 hp, the B7510HSD sits at the bottom end. Directly alongside are the BX1880 with 18.2 hp below and the BX23 with 22.3 hp above.

Technical data

Engine

Engine modelD1005-E-D16correct
Power21.3 hp (15.7 kW)correct
Rated speed2,600 rpmcorrect
Cylinders3correct
Displacement1,001.2 cm³correct
AspirationE-TVCS liquid cooledcorrect
Coolant capacity4.2 lcorrect
Engine oil capacity3 lcorrect

Dimensions and weights

Ground clearance304.8correct
Unladen weight620 kgcorrect

Drivetrain and chassis

Gearbox typeHST 2 rangecorrect
Forward gears2correct
Reverse gears2correct
Tyre sizefront 6-12 rear 9.5-16correct
Top speed15.6 km/hcorrect

Working data

Pump flow26.5 l/mincorrect
Fuel tank capacity20.1 lcorrect

Where this model stands

Power-to-weight ratio: 25.3 kW/t (16 kW / 0.6 t)

Power class: Compact (< 40 hp)

Stronger than 9% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota B7510HSD have?

The Kubota B7510HSD delivers 21.3 hp.

How much does the Kubota B7510HSD weigh?

The unladen weight is 620 kg.

What engine does the Kubota B7510HSD have?

3 cylinders, 1,001 cm³ displacement.

How fast does the Kubota B7510HSD go?

Top speed is 15.6 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare