StartTractorsKubota › B2910HSD

Kubota B2910HSD 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kubota B2910HSD is a tractor from the Kubota 4WD Tractor series. The four-cylinder engine, displacing 1.5 litres, produces 30 hp (22.4 kW). Rated power arrives at 2,600 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 19 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 800 kg.

Within the range, rated power spans from 18.2 to 116 hp; with 30.4 hp, the B2910HSD sits in the lower third. Directly alongside are the L2800HST with 29.4 hp below and the L3130DT with 32.5 hp above.

Technical data

Engine

Engine modelV1505correct
Power30.4 hp (22.4 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement1,499.4 cm³correct
AspirationE-TVCS liquid cooledcorrect
Coolant capacity4.5 lcorrect
Engine oil capacity4.2 lcorrect

Dimensions and weights

Ground clearance370.8correct
Unladen weight799.7 kgcorrect

Drivetrain and chassis

Gearbox typeHST 3 rangecorrect
Tyre sizefront 7-12 rear 12.4-16correct
Top speed19.2 km/hcorrect

Working data

Pump flow36.3 l/mincorrect
Fuel tank capacity26.1 lcorrect

Where this model stands

Power-to-weight ratio: 28 kW/t (22 kW / 0.8 t)

Power class: Compact (< 40 hp)

Stronger than 19% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kubota B2910HSD have?

The Kubota B2910HSD delivers 30.4 hp.

How much does the Kubota B2910HSD weigh?

The unladen weight is 800 kg.

What engine does the Kubota B2910HSD have?

4 cylinders, 1,499 cm³ displacement.

How fast does the Kubota B2910HSD go?

Top speed is 19.2 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare