Kubota B2650HSD MFWD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Kubota B2650HSD belongs to the Kubota MFWD Tractor series. Under the bonnet works a three-cylinder engine displacing 1.3 litres, producing 26 hp (19.4 kW). Rated power arrives at 2,500 rpm — the engine pulls from low down rather than needing to be revved.
Dimensions are 2.57 m by 1.37 m. Unladen, it tips the scales at 810 kg.
Within the range, rated power spans from 22.3 to 170 hp; with 26.4 hp, the B2650HSD sits in the lower third. Directly alongside are the B2601HSD with 25.9 hp below and the B3350HSD with 33.5 hp above.
Technical data
Engine
| Engine make | KUBOTAcorrect |
|---|---|
| Engine model | D1305-E4-D26-Rcorrect |
| Power | 26.4 hp (19.4 kW)correct |
| Rated speed | 2,500 rpmcorrect |
| Torque | 84.1correct |
| Cylinders | 3correct |
| Displacement | 1,261.8 cm³correct |
Dimensions and weights
| Length | 2,570.2correct |
|---|---|
| Width | 1,365.5correct |
| Height | 2,250 mmcorrect |
| Wheelbase | 1,667.3correct |
| Ground clearance | 370.1correct |
| Unladen weight | 810 kgcorrect |
Drivetrain and chassis
| Gearbox type | HST (3 ranges)correct |
|---|---|
| Forward gears | 3correct |
| Reverse gears | 3correct |
| Turning radius | 2,100 mmcorrect |
Working data
| Lifting capacity | 760 kgcorrect |
|---|---|
| Pump flow | 33.3 l/mincorrect |
| PTO output | 20 hpcorrect |
Where this model stands
Power-to-weight ratio: 24 kW/t (19 kW / 0.8 t)
Power class: Compact (< 40 hp)
Stronger than 15% of the tractors in the register — out of 15,105 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Kubota B2650HSD have?
The Kubota B2650HSD delivers 26.4 hp.
How much does the Kubota B2650HSD weigh?
The unladen weight is 810 kg.
What engine does the Kubota B2650HSD have?
3 cylinders, 1,262 cm³ displacement.
What is the PTO output of the Kubota B2650HSD?
PTO output is 20 hp.
How much does the rear linkage of the Kubota B2650HSD lift?
The rear linkage lifts 760 kg.
What are the dimensions of the Kubota B2650HSD?
2,570 mm × 1,366 mm × 2,250 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.