Krone VariPack V165 XC Plus – specifications
Series: Rundballenpresse / Round baler
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Krone Vario Pack1800 MC – round baler from the German farm machinery manufacturer: bale chamber, cutting rotor and binding for round bales of forage
Krone is a German farm machinery manufacturer based in Spelle in the Emsland region, and in grassland equipment its range spans mowers, tedders, rakes, and round-baling and forage-harvesting technology.
Read on 3 more paragraphs
A round baler such as the Vario Pack1800 MC picks up swathed forage using a tine pick-up, feeds it into a bale chamber, and there shapes it into a round bale using rollers, belts or chains. On a fixed-chamber baler, the chamber always has the same diameter; on a variable-chamber baler, the bale grows from the inside outward up to the set size. A cutting rotor ahead of the chamber shortens the stalks, which increases bale density and makes later feeding easier; at the end of the pressing cycle, the machine ties the bale with net or twine.
A round baler's size depends on the tractor power needed for the pick-up, bale chamber and, where fitted, the cutting rotor. On the road, the trailed implement is subject to the general rules on width, lighting and marking.
On a used machine, what counts is the condition of the belts or rollers in the bale chamber for wear and cracking, the tension and wear of the chains, the sharpness and completeness of the cutting rotor's knives, and the condition of the pick-up tines. The net or twine binding unit and the bale-chamber bearings should also be checked.
Sources: SpecCodex-Register: Kennwerte des Modells Krone Vario Pack1800 MC
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 1 individual figure for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: lectura-specs.com (retrieved August 2026) · Data sources and cross-checks
Round baler in 3D section
Turn the model, look inside and click an assembly — each one is explained.
