Krone SEP 10 ZLNZ 4, -
Built: 2013 · Series: SEP
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Krone SEP – trailer from the Werlte manufacturer in the Emsland region: five versions with 15 to 22 t gross weight and around 11.3 m length
Krone has built its trailers and semi-trailers in Werlte in the Emsland region since the 1970s, after the company, which grew out of agricultural technology, set up its own commercial vehicle division there. The SEP range covers a separate trailer line of the brand in the register, with models such as SEP 09, SEP 10 and SEP 10 ZLNZ 4. Krone places the SEP range in its line-up between the short distribution trailers and the long box semi-trailer combinations.
Read on 3 more paragraphs
The register lists 5 versions with unladen weights from 3,600 to 6,250 kg, gross weights from 15,000 to 22,000 kg, lengths from 11,250 to 11,350 mm and a width of 2,550 mm.
At around 11.3 m long, the SEP trailers sit between the shorter distribution trailers and the long box semi-trailer combinations, suiting drawbar combinations in long-haul and scheduled traffic, where the greatest possible loading volume within a limited overall combination length matters; here Krone meets competitors such as Schmitz Cargobull and Kässbohrer.
When buying used, check the drawbar and overrun brake for play and braking effect, the frame and side members for corrosion, the axles, brakes and tyres, and the tarpaulin, tilt frame or roller shutters depending on the body; comparing the axle loads with the vehicle papers gives clues to later conversions. On tilt-frame versions, the roof bows and their locking mechanism also deserve a close look.
Sources: SpecCodex register, model data: Krone SEP, Krone Trailer (manufacturer)
Technical data
Dimensions and weights
| Length | 11,350 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,400 mmcorrect |
| Unladen weight | 6,100 kgcorrect |
| Gross vehicle weight | 22,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Krone SEP 10 ZLNZ 4, - weigh?
The unladen weight is 6,100 kg.
What is the gross vehicle weight of the Krone SEP 10 ZLNZ 4, -?
22,000 kg.
Up to what speed is the Krone SEP 10 ZLNZ 4, - approved?
Approved up to 100 km/h.
What are the dimensions of the Krone SEP 10 ZLNZ 4, -?
11,350 mm × 2,550 mm.
When was the Krone SEP 10 ZLNZ 4, - built?
Production years: 2013.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
