Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Krieger › KS33A

Krieger KS33A

Series: KS

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The KS series from Krieger includes the KS33A. The engine delivers 33 hp, has 2 cylinders. Rated speed is 2,300 rpm. The machine is 940 mm wide and 1,900 mm high. Top speed is 24 km/h. Transmission: Hurth. The engine is air-cooled. Tyres: front 7,00-12, rear 8,00-20. The fuel is diesel. The gearbox offers 12 forward gears. There are also 2 reverse gears. Rated output across the Krieger range ranges from 28.5 to 102 hp; the KS33A sits at the bottom of that range with 33 hp. Its immediate neighbours are the KS 28 A below it with 28.5 hp and the KT 52 above it with 50 hp. Rated output across the Krieger range ranges from 28.5 to 102 hp; here the KS33A sits at the bottom of that range with 33 hp. 15 Krieger models across 3 series are on record.

Krieger KS series: light agricultural tractors with two-cylinder diesel engines, from the KS 28 A to the KS33A, 28.5 to 33 hp at a kerb weight of 1,195 kg

This page collects the KS series from Krieger, light agricultural tractors with a two-cylinder diesel engine, built for smaller and medium-sized farms as well as for special crops and orchard work. The KS designation on both recorded models, the KS 28 A and the KS33A, marks the same series, with the attached number denoting the power step.

Read on 3 more paragraphs

The register lists 2 versions from 28.5 to 33 hp (21 kW) from two-cylinder diesel engines of 1,478 cm³ displacement at 2,300 rpm. Kerb weight is 1,195 kg, length 2,450 mm, width 940 mm and height between 1,850 and 1,900 mm.

Tractors of this size and build were tailored to narrow row spacing and cramped yard conditions such as those found in vineyard, orchard and special-crop work, competing there with the corresponding series from larger manufacturers. Their compact dimensions allowed work between tight rows of trees where wider standard tractors were not manoeuvrable enough, and the two-cylinder diesel gave enough pulling power for tillage implements and small trailers alike.

When buying a used example, check the condition of injection pump and cylinder head, the tightness of clutch and gearbox, wear on steering and front axle, and corrosion on the bodywork and wings, which on these narrow special tractors are often made thinner; spare parts for this rare series are mostly found through collectors and tractor enthusiasts.

Sources: SpecCodex register, model data: Krieger KS

Technical data

Engine

Fueldieselcorrect
Power33 hpcorrect
Power33 hpcorrect
Rated speed2,300 rpmcorrect
Cylinders2correct
Coolingair-cooledcorrect

Dimensions and weights

Width940 mmcorrect
Height1,900 mmcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
GearboxHurthcorrect
Forward gears12correct
Reverse gears2correct
Front tyres7, 00-12correct
Rear tyres8, 00-20correct
Top speed24 km/hcorrect

Frequently asked questions

How much power does the Krieger KS33A have?

The Krieger KS33A delivers 33 hp.

What engine does the Krieger KS33A have?

2 cylinders, Diesel.

How fast does the Krieger KS33A go?

Top speed is 24 km/h.

What are the dimensions of the Krieger KS33A?

940 mm × 1,900 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare