Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Kramer › Other models › KL 730

Kramer KL 730 – specifications

Built: 1970 · Series: Other models

Data for the version built 1970 · Data origin: Official register · sources

More machines from model year 1970

Source: pinterest.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kramer KL 730 is a vehicle built by Kramer. Production: 1970. The engine has 1 cylinder. The vehicle is 1,620 mm wide. The unladen weight is 1,270 kg. The wheelbase measures 1,680 mm. The vehicle runs on 4 wheels. Unladen weight across the Kramer range ranges from 550 to 12,652 kg; the KL 730 sits at the bottom of that range with 1,270 kg. Its immediate neighbours are the K 12 VK below it with 1,250 kg and the GL 14 above it with 1,300 kg. 137 Kramer models across 20 series are on record.

Kramer KL 730: a small commercial vehicle from the Wörth am Main manufacturer with a single-cylinder engine and short wheelbase, built in 1970

Kramer-Werke, based in Wörth am Main, is best known today for compact loaders and telehandlers, but in earlier decades it also built small transport vehicles. The KL 730 described here, from 1970, belongs to this older vehicle line.

Read on 3 more paragraphs

The KL 730 is powered by a single-cylinder engine, with a kerb weight of 1,270 kg. With a wheelbase of just 1,680 mm and a width of 1,620 mm, the vehicle is unusually short and compact, running on four wheels. These proportions are typical of a nimble small utility vehicle rather than a road-going long-distance van.

Vehicles with a single-cylinder engine and such a short wheelbase were built for simple transport tasks over short distances, for example on a factory site or a farm, where manoeuvrability mattered more than ride comfort or speed. The simple drivetrain made such vehicles robust and easy to repair.

On such an old and simply built vehicle, it is worth checking the engine mounts, clutch and drivetrain for wear, since single-cylinder engines of this era often vibrate heavily and are stressed accordingly. The frame and sheet metal should be examined for corrosion at the wheel arches and body seams, and since this is a rare, niche vehicle, it is worth checking before purchase whether wear parts can still be sourced or need to be remade by hand.

Sources: SpecCodex-Register: Kennwerte des Modells Kramer KL 730, Kramer-Werke (manufacturer)

Technical data

Engine

Cylinders1correct

Dimensions and weights

Width1,620 mmcorrect
Wheelbase1,680 mmcorrect
Unladen weight1,270 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Kramer KL 730 weigh?

The unladen weight is 1,270 kg.

What engine does the Kramer KL 730 have?

1 cylinders.

When was the Kramer KL 730 built?

Production years: 1970.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​⁠‍‌‌⁠‌​‍‍⁠‌​​‌‍⁠‍‍

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare