Komptech NEMUS 30012
Built: 2026 · Series: NEMUS
More machines from model year 2026
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Komptech Nemus – mobile drum screen on chassis from the Austrian manufacturer in Frohnleiten: five versions with 16.4 to 16.8 t unladen weight for compost processing
Komptech, based in Frohnleiten in Styria, builds mobile machines for processing organic waste and recyclable materials, including shredders such as the Crambo, turners such as the Topturn and screening machines in the Nemus range. Nemus denotes a drum screen on its own chassis that separates material by particle size using a rotating, perforated drum; the range in the register includes models such as the Nemus 620 and Nemus 2700.
Read on 3 more paragraphs
The register lists 5 versions with unladen weights from 16,390 to 16,780 kg, gross weights from 17,000 to 19,000 kg, lengths from 11,890 to 12,000 mm and widths from 2,530 to 2,550 mm.
Drum screens of this type are used in composting plants, bio-waste processing and wood chip production, where they separate fine from coarse material; in the mobile screening technology market Komptech competes with manufacturers such as Doppstadt and Terex Ecotec. Mobility on its own chassis allows the machine to move between successive composting sites without needing separate low-loader transport.
When buying used, the drum's screen mesh deserves particular attention for wear and enlarged holes, along with the drum bearings, the drive motor and its hydraulics, and the conveyor belts; the chassis, axles and brakes should be checked as on any trailer, along with the operating-hour counter and maintenance records, since these machines usually run multiple shifts.
Sources: SpecCodex register, model data: Komptech NEMUS, Komptech (manufacturer)
Technical data
Dimensions and weights
| Length | 11,900 mmcorrect |
|---|---|
| Width | 2,530 mmcorrect |
| Wheelbase | 7,750 mmcorrect |
| Unladen weight | 16,520 kgcorrect |
| Gross vehicle weight | 19,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 90 km/hcorrect |
Frequently asked questions
How much does the Komptech NEMUS 30012 weigh?
The unladen weight is 16,520 kg.
What is the gross vehicle weight of the Komptech NEMUS 30012?
19,000 kg.
Up to what speed is the Komptech NEMUS 30012 approved?
Approved up to 90 km/h.
What are the dimensions of the Komptech NEMUS 30012?
11,900 mm × 2,530 mm.
When was the Komptech NEMUS 30012 built?
Production years: 2026.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.