Komptech HURRIKAN 5
Built: 2007 · Series: Other models
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Komptech – other models: the collective page of shredders and screens on trailer chassis outside the named ranges, from Crambo and Multistar to Axtor and Hurrikan, 4.7 to 26 t operating weight
This page gathers the Komptech machines on trailer chassis the register could not assign to a named range – shredders, screens and compost aerators from the Austrian manufacturer based in Frohnleiten, Styria. The model names denote the machine families: Crambo covers the single- and twin-shaft shredders, Multistar the star screens, Cribus the drum screens, Axtor the universal shredder with interchangeable tools, Mustang and Stoneflex the screens with wind sifting and stone separation, and Hurrikan the mobile aerators that supply air to compost windrows.
Read on 3 more paragraphs
The register lists here 29 versions with operating weights from 4,670 to 25,980 kg, gross weights from 5,000 to 28,000 kg, lengths from 7,650 to 14,040 mm and widths from 2,380 to 2,560 mm.
Alongside makers such as Doppstadt and Terex Ecotec, Komptech is among the leading suppliers of mobile processing technology for green waste, bulky waste, waste wood and refuse-derived fuel; the trailer-mounted design lets the machines move between composting sites, recycling yards and building sites without a low-loader.
On used machines of this kind, the operating hours of the drive engine, the condition of the shredding tools, rollers and screens, wear on the conveyor belts and magnetic separators, the hydraulics and the trailer's chassis, axles and brakes all count; spare and wear parts run through the Komptech dealer network.
Sources: SpecCodex register, model data: Komptech (weitere Modelle), Komptech (manufacturer)
Technical data
Dimensions and weights
| Length | 11,930 mmcorrect |
|---|---|
| Width | 2,450 mmcorrect |
| Wheelbase | 10,000 mmcorrect |
| Unladen weight | 9,160 kgcorrect |
| Gross vehicle weight | 10,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Komptech HURRIKAN 5 weigh?
The unladen weight is 9,160 kg.
What is the gross vehicle weight of the Komptech HURRIKAN 5?
10,000 kg.
Up to what speed is the Komptech HURRIKAN 5 approved?
Approved up to 100 km/h.
What are the dimensions of the Komptech HURRIKAN 5?
11,930 mm × 2,450 mm.
When was the Komptech HURRIKAN 5 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-NEMMUS 2700
AXTOR 4510
AXTOR 6210
CRAMBO 5000
CRIBUS
CRIBUS 3800
Crambo 5200 ec direct
HURRIKAN
HURRIKAN S
JOKER
KOMPTECH
MAGNUM
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
