Komatsu WA100M-6 – specifications
Series: Komatsu Wheel Loader
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Komatsu W30 to W120: decoding the letter, the number and the dash
Komatsu wheel loader names like W30, W60, W70-3, W90-3 or W120-3 actually belong to two parallel naming families: the shorter "W" designation used for compact or older size classes, and today's more common "WA" designation for current mainline production. SpecCodex lists 104 models under "Komatsu Wheel Loader" spanning both spellings.
Read on 3 more paragraphs
The number after the letter roughly places a machine in a size class: low numbers like W30 mark compact loaders, mid-range ones like W60 or W70 the classic construction-site loader, and higher numbers like W120 already larger construction and industrial machines. The dash followed by a digit – such as "-3" on W70-3 and W90-3 – is not a model variant but purely a generation marker: according to industry sources, this dash number signals an updated engine, hydraulics and cab within the same size class.
For a used loader, what matters most is the condition of the bucket cutting edge and the lift-linkage bushings, since these wear parts directly determine remaining service life. The smallest machines in this line sit at around 21 kW of engine power and 3,719 kg operating weight according to the database – typical compact-class figures, well below the large construction models.
In short: "W" or "WA" marks the product family, the following number the size class, and the dash the generation – W30, W60, W90-3 or W120-3 can be roughly placed this way, even though power and weight still vary noticeably within one size class depending on equipment.
Sources: SpecCodex register, model data: Komatsu Wheel Loader, Komatsu Serial Number Lookup & Decoder – Dash-Nummer als Generationskennung, Komatsu Dash-7 Radlader-Baureihe
Technical data
Engine
| Engine model | Komatsu SAA4D95LE-5correct |
|---|---|
| Cylinders | 4correct |
| Displacement | 3,300.4 cm³correct |
Dimensions and weights
| Unladen weight | 3,118.4 kgcorrect |
|---|
Working data
| Fuel tank capacity | 140.1 lcorrect |
|---|---|
| Lowering time | 3.5 scorrect |
Frequently asked questions
How much does the Komatsu WA100M-6 weigh?
The unladen weight is 3,118 kg.
What engine does the Komatsu WA100M-6 have?
4 cylinders, 3,300 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Wheel loader in 3D section
Turn the model, look inside and click an assembly — each one is explained.
