Komatsu PC308USLC-3
Series: Komatsu Hydraulic Excavator
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | SAA6D107E-1correct |
|---|---|
| Power | 202.8 hp (139.4 kW)correct |
| Cylinders | 6correct |
| Displacement | 6,685.9 cm³correct |
| Aspiration | Turbocharged and air to air aftercooledcorrect |
| Coolant capacity | 20.8 lcorrect |
| Engine oil capacity | 23.1 lcorrect |
Dimensions and weights
| Ground clearance | 509correct |
|---|---|
| Unladen weight | 32,630.5 kgcorrect |
Working data
| Hydraulic oil capacity | 210.1 lcorrect |
|---|---|
| Fuel tank capacity | 389.9 lcorrect |
Other data
| Height | 3,124.2correct |
|---|
Where this model stands
Power-to-weight ratio: 4.3 kW/t (139 kW / 32.6 t)
Stronger than 68% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Komatsu PC308USLC-3 have?
The Komatsu PC308USLC-3 delivers 203 hp.
How much does the Komatsu PC308USLC-3 weigh?
The unladen weight is 32,630 kg.
What engine does the Komatsu PC308USLC-3 have?
6 cylinders, 6,686 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.