Technical register for agricultural, construction and commercial machinery · sourced data
Start › Excavators & compaction › Komatsu › PC160LC-7

Komatsu PC160LC-7

Series: Komatsu Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The PC160LC-7 from Komatsu is part of the Komatsu Hydraulic Excavator series. The engine delivers 122.7 hp (85.8 kW), with a displacement of 4,457.3 cm³. The unladen weight is 16,619.6 kg. Ground clearance is 432.8 mm. The tank holds 280.1 litres. The hydraulic tank holds 121.1 litres. The cooling system holds 18.5 litres. The oil fill is 15.9 litres. The engine fitted is the SAA4D107E-1. The Komatsu Hydraulic Excavator series covers 184 models. Rated output within it ranges from 72.1 to 3,782.5 hp; the PC160LC-7 sits at the bottom of that range with 122.7 hp. Its immediate neighbours are the PC160LC-7 Tier 3 below it with 122.4 hp and the PC200-6 EXCEL above it with 129.2 hp. Unladen weight within it ranges from 10,300 to 685,000 kg; here the PC160LC-7 sits at the bottom of that range with 16,619.6 kg. 1218 Komatsu models across 47 series are on record.

Komatsu PC — what the number and dash figure actually tell you

Anyone typing “Komatsu PC120” or “PC100” is usually trying to decode the label: PC is Komatsu's crawler-excavator designation, the following number places the model roughly in a size class, and a dash number at the end marks the generation.

Read on 4 more paragraphs

Recent generations run under labels such as -8, -10 or -11; each update brings a revised engine, hydraulics and cab plus tighter emissions rules, while the base number stays the same. The added letter LC marks a widened, lengthened undercarriage that spreads more contact area on soft soil.

Alongside the PC line, Komatsu also sells models such as H135S, H455S or H655S, a separate family for very large open-pit excavators tracing back to the earlier partnership with German manufacturer Demag. Its letter-and-number logic follows its own rules and does not map onto the PC models.

The “Komatsu Hydraulic Excavator” collective entry holds both families side by side, from compact excavators starting around 53 kW up to the large H-series machines. When buying used, check the hour meter along with track rollers, chain tension and cylinder seals.

In short: the number after PC signals the size class, the dash number the generation, and models like PC100, PC120 or H655S show how wide a range sits under one register entry.

Sources: SpecCodex register, model data: Komatsu Hydraulic Excavator, Bagger-Typenschluessel im Herstellervergleich, Komatsu Seriennummern- und Generationen-Leitfaden, Demag-Komatsu H655S, Museumsarchiv

Technical data

Engine

Engine modelSAA4D107E-1correct
Power122.7 hp (85.8 kW)correct
Displacement4,457.3 cm³correct
AspirationTurbocharged, aftercooledcorrect
Coolant capacity18.5 lcorrect
Engine oil capacity15.9 lcorrect

Dimensions and weights

Ground clearance432.8 mmcorrect
Unladen weight16,619.6 kgcorrect

Working data

Hydraulic oil capacity121.1 lcorrect
Fuel tank capacity280.1 lcorrect

Other data

Cab height2,971.8 mmcorrect

More machines with this engine (SAA4D107E-1, 7)

Where this model stands

Power-to-weight ratio: 5.2 kW/t (86 kW / 16.6 t)

Stronger than 34% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Komatsu PC160LC-7 have?

The Komatsu PC160LC-7 delivers 123 hp.

How much does the Komatsu PC160LC-7 weigh?

The unladen weight is 16,620 kg.

What engine does the Komatsu PC160LC-7 have?

4,457 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare