Start › Excavators & compaction › Kobelco › SK70SR-2

Kobelco SK70SR-2

Series: Kobelco Midi Excavator

Source: https://www.truck1.eu/construction-machinery/crawler-excavat

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kobelco Midi Excavator series from Kobelco includes the SK70SR-2. The engine delivers 55.8 hp (41 kW), has 4 cylinders, with a displacement of 2,200.8 cm³. The unladen weight is 7,470 kg. Ground clearance is 365.8 mm. The hydraulic tank holds 132.1 litres. Working pressure is 294 bar. The engine fitted is the AU-4LE2X. The Kobelco Midi Excavator series covers 15 models. Rated output within it ranges from 39.8 to 55.8 hp; the SK70SR-2 sits at the top of that range with 55.8 hp. Its immediate neighbours are the SK55SR-5 below it with 39.8 hp. 98 Kobelco models across 6 series are on record. The model is listed under Excavators & compaction. 9 verified figures from 1 source are on file.

Technical data

Engine

Engine modelAU-4LE2Xcorrect
Power55.8 hp (41 kW)correct
Cylinders4correct
Displacement2,200.8 cm³correct

Dimensions and weights

Ground clearance365.8correct
Unladen weight7,470 kgcorrect

Working data

Hydraulic oil capacity132.1 lcorrect
Hydraulic pressure294 barcorrect

Where this model stands

Power-to-weight ratio: 5.5 kW/t (41 kW / 7.5 t)

Stronger than 11% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kobelco SK70SR-2 have?

The Kobelco SK70SR-2 delivers 55.8 hp.

How much does the Kobelco SK70SR-2 weigh?

The unladen weight is 7,470 kg.

What engine does the Kobelco SK70SR-2 have?

4 cylinders, 2,201 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

50SR ACERA

50SR-3

70SR

70SR ACERA

80CS

80CS ACERA

ED160-5 BLADE RUNNER

SK140SRLC-5

SK230SRLC-5

SK270SRLC-5

SK55SR-5

SK75SR-3E

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare