Start › Mini excavators › Kobelco › 13SR

Kobelco 13SR

Series: Kobelco Mini Excavator

Source: https://kobelco.co.nz/product/sk135sr-7/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kobelco 13SR is a model in the Kobelco Mini Excavator series. The engine delivers 8.9 kW, has 3 cylinders, with a displacement of 784.9 cm³. Rated speed is 2,000 rpm. The unladen weight is 1,469.6 kg. Ground clearance is 182.9 mm. The tank holds 15.1 litres. The pump delivers 35.6 l/min. The hydraulic tank holds 17 litres. Working pressure is 206 bar. The electrical system runs on 12 V. The engine fitted is the 3TNE68-YB. The Kobelco Mini Excavator series covers 16 models. Rated output within it ranges from 8.9 to 29.3 kW; the 13SR sits at the bottom of that range with 8.9 kW. Its immediate neighbours are the SK17SR-5E above it with 10.8 kW. 98 Kobelco models across 6 series are on record. The model is listed under Excavators & compaction. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine model3TNE68-YBcorrect
Power8.9 kWcorrect
Rated speed2,000 rpmcorrect
Cylinders3correct
Displacement784.9 cm³correct

Dimensions and weights

Ground clearance182.9correct
Unladen weight1,469.6 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow35.6 l/mincorrect
Hydraulic oil capacity17 lcorrect
Hydraulic pressure206 barcorrect
Fuel tank capacity15.1 lcorrect

Other data

Height2,502.4correct

Where this model stands

Power-to-weight ratio: 6.1 kW/t (9 kW / 1.5 t)

Stronger than 4% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Kobelco 13SR have?

The Kobelco 13SR delivers 8.9 kW.

How much does the Kobelco 13SR weigh?

The unladen weight is 1,470 kg.

What engine does the Kobelco 13SR have?

3 cylinders, 785 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

17SR ACERA

27SR ACERA

27SR-3

30SR-3

35SR ACERA

35SR-3

SK17SR-5E

SK25SR-6E

SK30SR-5

SK30SR-6E

SK35SR-5

SK35SR-6E

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare