Knapen SPL 130-C
Built: 2000 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Knapen - other models: Dutch walking-floor semi-trailers outside the named series, 66 versions, gross weights up to 54 t, lengths up to 14.1 m
Knapen is a Dutch manufacturer of walking-floor trailers for transporting bulk goods, waste and agricultural produce. This collective page lists all Knapen versions that could not be assigned to a separately named series, from compact K types to the KOWF and KOS ranges for long semi-trailers.
Read on 3 more paragraphs
The register lists 66 versions with kerb weights from 640 to 10,580 kg, gross weights from 1,300 to 54,000 kg, widths from 1,700 to 2,600 mm and lengths from 9,190 to 14,100 mm.
Walking-floor trailers unload without tipping, pushing the load rearwards with moving floor slats, which makes them suitable for sensitive bulk material, silage or recycling material; in this niche segment Knapen, alongside makers such as Fruehauf and Groenewegen, ranks among the better-known European suppliers, whose vehicles are used mainly in the waste and recycling trade and for transporting bulk agricultural produce such as silage or compost.
When buying used walking-floor trailers, check above all the condition and smooth running of the floor chain and its drive motor, wear on the floor slats and side walls, the tightness of the hydraulics, the state of axles and brakes, and corrosion on the frame and chassis; spares for the walking floor are usually only available directly from the manufacturer, so it is worth asking about parts availability before agreeing a price.
Sources: SpecCodex register, model data: Knapen Anhänger (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,860 mmcorrect |
|---|---|
| Width | 2,520 mmcorrect |
| Wheelbase | 9,060 mmcorrect |
| Unladen weight | 6,960 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Knapen SPL 130-C weigh?
The unladen weight is 6,960 kg.
What is the gross vehicle weight of the Knapen SPL 130-C?
39,000 kg.
Up to what speed is the Knapen SPL 130-C approved?
Approved up to 100 km/h.
What are the dimensions of the Knapen SPL 130-C?
13,860 mm × 2,520 mm.
When was the Knapen SPL 130-C built?
Production years: 2000.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.