Klaeser TSA 30
Built: 2011 · Series: Other models
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kläser – further models: TSA-series semi-trailers outside the named series, gross weight 27,000 to 34,000 kg, lengths 11,400 to 12,110 mm, widths up to 2,550 mm
This page gathers the Kläser-brand trailers that the register could not assign to a named series. Type names such as TSA 30 and TSA 35C follow a numbering in which the figure marks the gross weight in tonnes and the letter suffix marks the version.
Read on 3 more paragraphs
The register lists 3 versions here with unladen weights from 5,940 to 9,860 kg, gross weights from 27,000 to 34,000 kg, lengths from 11,400 to 12,110 mm and widths from 2,500 to 2,550 mm.
At gross weights of 27 to 34 tonnes and lengths over 11 metres, the Kläser trailers belong to the semi-trailers for long-haul freight, used behind articulated tractors for general and bulk cargo. With gross weights well above 10 tonnes, all versions fall into EU vehicle category O4 for trailers and semi-trailers, which may only be towed by suitably approved tractor units.
When buying used, check the frame and chassis rails for cracks and deflection, the axles, braking system and overrun brake device, the condition of the tarpaulin or side panels, and wear on the fifth-wheel plate; spare parts for axles and brakes are available through the independent commercial-vehicle trade. Underrun protection, mudguards and the condition of the brake and lighting connection lines are also worth checking, along with tyre age via the DOT date code. Complete vehicle documents, a valid registration and a current roadworthiness and safety inspection also matter when buying used.
Sources: SpecCodex register, model data: Kläser (weitere Modelle)
Technical data
Dimensions and weights
| Length | 12,000 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,900 mmcorrect |
| Unladen weight | 9,860 kgcorrect |
| Gross vehicle weight | 34,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Klaeser TSA 30 weigh?
The unladen weight is 9,860 kg.
What is the gross vehicle weight of the Klaeser TSA 30?
34,000 kg.
Up to what speed is the Klaeser TSA 30 approved?
Approved up to 100 km/h.
What are the dimensions of the Klaeser TSA 30?
12,000 mm × 2,550 mm.
When was the Klaeser TSA 30 built?
Production years: 2011.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.