King Trailers GTS 44/3
Built: 2003-2003 · Series: Other models
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
King Trailers – other models: the collective page of low-loader trailers outside the named ranges, GTS44 to GTSK38/3, 4,624 to 28,900 kg unladen weight, 24,000 to 56,000 kg gross weight, up to 13,870 mm length
This page gathers the King Trailers units the register could not assign to a named range – with four versions sharing the GTS code, this forms a closely related type family. King Trailers of Market Harborough, England, builds low-loader trailers for transporting construction machinery and heavy loads; the GTS code denotes this low-loader design. As with many makers, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 4,624 to 28,900 kg, gross weights from 24,000 to 56,000 kg, lengths from 13,200 to 13,870 mm and widths from 2,540 to 3,040 mm.
With gross weights of up to 56 tonnes and widths of over 3 metres, the heaviest versions already fall into the area of permit-requiring special transport, typical for carrying excavators, dozers and other construction machinery; a CE licence with the corresponding additional training is required. The uniform length of around 13.5 metres against a strongly varying weight points to different axle counts and load ratings within the same body length.
On a used low-loader, the condition of the ramps and their hydraulics, the axle assemblies and steering axles, brake electronics, rust on frame and load bed, and tyres and rims all count in particular; on extendable versions the function and locking of the sliding section as well. Parts run through the maker and independent commercial-vehicle workshops. Before purchase it is also worth matching the rated axle loads against the intended use.
Sources: SpecCodex register, model data: King Trailers (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,600 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 4,624 kgcorrect |
| Gross vehicle weight | 24,000 kgcorrect |
Frequently asked questions
How much does the King Trailers GTS 44/3 weigh?
The unladen weight is 4,624 kg.
What is the gross vehicle weight of the King Trailers GTS 44/3?
24,000 kg.
What are the dimensions of the King Trailers GTS 44/3?
13,600 mm × 2,550 mm.
When was the King Trailers GTS 44/3 built?
Production years: 2003.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.