Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › King › GTS 44/3

King GTS 44/3

Built: 2008-2008 · Series: Other models

More machines from model year 2008

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The King GTS 44/3 is a machine built by King. Production: 2008. The machine is 14,030 mm long and 2,540 mm wide. The unladen weight is 6,830 kg. The gross vehicle weight is 30,000 kg. Unladen weight across the King range ranges from 700 to 8,490 kg; the GTS 44/3 sits in the upper part of that range with 6,830 kg. Its immediate neighbours are the 373 below it with 700 kg and the GTS 38/3-17.5 above it with 7,350 kg. Gross vehicle weight across the King range ranges from 850 to 41,000 kg; here the GTS 44/3 sits in the upper part of that range with 30,000 kg. 7 King models are on record.

King – other models: the collective page of trailers outside the named ranges, from 373 through GTL60/3H to KT526/2.175, 700 to 8,490 kg unladen weight, 850 to 41,000 kg gross weight

This page gathers the King trailers the register could not assign to a named range. The seven entries range from the bare numeric code 373 through the GTS- and GTL-prefixed type codes to KT526/2.175, with no consistent system readable from them. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.

Read on 3 more paragraphs

The register lists here 7 versions with unladen weights from 700 to 8,490 kg, gross weights from 850 to 41,000 kg, lengths from 9,700 to 14,750 mm and widths from 1,990 to 2,550 mm.

The wide span from under a tonne to 41 tonnes gross weight reaches from the light trailer still towable on a car licence to the heavy low-loader or semi-trailer for special transport; the heaviest versions require a CE licence. Lengths of up to nearly 15 metres already match the size of permit-requiring abnormal loads.

On a used example, different points count depending on the weight class: on the light versions the axle, overrun brake and frame corrosion, on the heavy ones the condition of the axle assemblies, brake electronics, frame and fifth-wheel, and tyres and rims. Lighting and the plug connection should be checked at every size. Parts for such small brands usually run through independent trailer and commercial-vehicle workshops.

Sources: Kennwerte der Modelle King (weitere Modelle)

Technical data

Dimensions and weights

Length14,030 mmcorrect
Width2,540 mmcorrect
Unladen weight6,830 kgcorrect
Gross vehicle weight30,000 kgcorrect

Frequently asked questions

How much does the King GTS 44/3 weigh?

The unladen weight is 6,830 kg.

What is the gross vehicle weight of the King GTS 44/3?

30,000 kg.

What are the dimensions of the King GTS 44/3?

14,030 mm × 2,540 mm.

When was the King GTS 44/3 built?

Production years: 2008.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare