Kamag K2504
Built: 2012-2012 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Length | 897 mmcorrect |
|---|---|
| Width | 300 mmcorrect |
| Wheelbase | 450 mmcorrect |
| Unladen weight | 14,510 kgcorrect |
| Gross vehicle weight | 64,000 kgcorrect |
Drivetrain and chassis
| Wheels | 32correct |
|---|---|
| Top speed | 80 km/hcorrect |
Frequently asked questions
How much does the Kamag K2504 weigh?
The unladen weight is 14,510 kg.
What is the gross vehicle weight of the Kamag K2504?
64,000 kg.
Up to what speed is the Kamag K2504 approved?
Approved up to 80 km/h.
When was the Kamag K2504 built?
Production years: 2012.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.